Department Of Chemistry And Chemical Technology 2

51. Eco-Friendly Polypropylene Composites Reinforced with Cellulose Fibers and Silica Nanoparticles
52. Thermal Decomposition and Combustion Behavior of Hydrogen Peroxide (H₂O₂) as Sustainable Fuel for Green Propulsion Technologies via Heterogeneous Low-Cost Catalysts
53. Biomass-Derived Nanoporous Carbon Honeycomb Monoliths for Environmental Lipopolysaccharide Adsorption from Aqueous Media
54. IDENTIFYING THE INFLUENCE OF BASALT FIBER REINFORCEMENT ON THE DEFORMATION AND STRENGTH CHARACTERISTICS OF CEMENT STONE
55. Fluorine-Containing Block and Gradient Copoly(2-oxazoline)s Based on 2-(3,3,3-Trifluoropropyl)-2-oxazoline: A Quest for the Optimal Self-Assembled Structure for ¹⁹F Imaging
56. PLGA-PEG Nanoparticles Loaded with Cdc42 Inhibitor for Colorectal Cancer Targeted Therapy
57. Specificity of Thermal Destruction of Nonwoven Mixture Systems Based on Bast and Viscose Fibers
58. Environmental Impact of Wastewater on Surface and Groundwater in Central Asia
59. Use of Permeable Reactive Barriers in the Removal of ACT and DCF from Effluents of Wastewater Treatment Plants
60. Wastewater Treatment in Central Asia: Treatment Alternatives for Safe Water Reuse
61. Controlled Synthesis of Polyaniline-Based Nanomaterials with Self-Assembly and Interface Manipulation
62. p-Toluenesulfonic acid doped vanadium pentoxide/polypyrrole film for highly sensitive hydrogen sensor
63. Effect of CaO, Al₂O₃, and MgO Supports of Ni Catalysts on the Formation of Graphite-like Carbon Species during the Boudouard Reaction and Methane Cracking
64. H₂O₂ and HAN Green Monopropellants—A State-of-the-Art Review on Their Recent Development, Corresponding Synthesized Catalysts, and Their Possible Use as Thrusters
65. Heat Capacity and Thermodynamic Characteristics of Sodium and Potassium Nickelite-Manganites of Neodymium of NdNa₂NiMnO₅ and NdK₂NiMnO₅
66. New dispersions for pigment printing binders in the manufacture of light industry goods
67. Synthesis of hydrolytically and oxidation-responsive networks using thiol-ene “click” chemistry with pentaerythritol tetrakis(3-mercaptopropionate) and tri/tetra-acrylates
68. A mini-review on recent developments in anti-icing methods
69. Patterns of Formation of Binary Cobalt–Magnesium Oxide Combustion Catalysts of Various Composition
70. Research of the Thermal Effect on the Fe-Cr-Al Alloy Foil in the Initial State and with the Supported Secondary Carrier
71. Synthesis of Vanadium-Containing Catalytically Active Phases for Exhaust Gas Neutralizers of Motor Vehicles and Industrial Enterprises
72. Happy 70th birthday, Professor Sarkyt E. Kudaibergenov
73. Interpolymer Complexation Between Cellulose Ethers, Poloxamers, and Polyacrylic Acid: Surface-Dependent Behavior
74. Tissue engineered implants derived from sustainable nanocellulose and polyethylene glycol (PEG) loaded with polyphenols: An in vivo study on albino rats for wound dressing
75. Organosilica nanoparticles functionalised with p-anisaldehyde and p-chlorobenzaldehyde Schiff bases: Synthesis, physicochemical properties, toxicological and antimicrobial evaluation
76. Phytochemical Profiling, Antioxidant and Antimicrobial Potentials of Ethanol and Ethyl Acetate Extracts of Chamaenerion latifolium L.
77. Carbon-Nanotube-Based Superhydrophobic Magnetic Nanomaterial as Absorbent for Rapid and Efficient Oil/Water Separation
78. Design and Application of Superhydrophobic Magnetic Nanomaterials for Efficient Oil–Water Separation: A Critical Review
79. Facile Fabrication of High-Performance Superhydrophobic Reusable Oil-Absorbing Sponges
80. Physicochemical Properties and Adsorption Mechanisms of Bentonite–Sawdust-Derived Carbon Composites
81. Reduced graphene oxide-based superhydrophobic magnetic nanomaterial as high selective and recyclable sorbent for oil/organic solvent wastewater treatment
82. State Regulation and Strategic Management of Water Resources and Wastewater Treatment at the Regional Level: Institutional and Technological Solutions
83. Superhydrophobic SiO₂/Trimethylchlorosilane Coating for Self-Cleaning Application of Construction Materials
84. Adsorption of Bichromate and Arsenate Anions by a Sorbent Based on Bentonite Clay Modified with Polyhydroxocations of Iron and Aluminum by the “Co-Precipitation” Method
85. Comparative Study of the Physico-Chemical Properties of Sorbents Based on Natural Bentonites Modified with Iron (III) and Aluminium (III) Polyhydroxocations
86. Physico-Chemical Properties of Granular Sorbents Based on Natural Bentonite Modified by Polyhydroxocations of Aluminum and Iron (III) by Co-Precipitation
87. Investigation of the Effect of Aluminum Powder on the Combustion Rate of the Composite
88. One-pot decoration of CdS and CdMoO₄ nanoparticles on g-C₃N₄ nanoplates: Boosted photocatalytic degradation of tetracycline
89. Practical machine learning model selection and interpretation for organophosphorus flame retardancy in Epoxy resin
90. Design and Fabrication of Membranes Based on PAN Copolymer Obtained from Solutions in N-methylmorpholine-N-oxide
91. Low-Alpha-Cellulose-Based Membranes
92. Membranes Based on Cellulose and Copolymers of Acrylonitrile Prepared from Joint Solutions
93. Structure, Morphology, and Permeability of Cellulose Films
94. Advances in antimicrobial polymeric iodophors
95. Polymeric iodophors with poly(2-ethyl-2-oxazoline) and poly(N-vinylpyrrolidone): optical, hydrodynamic, thermodynamic, and antimicrobial properties
96. “Enhancing electrochemical performance of LaNi₅ anodes using MXene as a multifunctional additive for Ni-MH batteries”
97. Understanding the temperature induced aggregation of silica nanoparticles decorated with temperature-responsive polymers: Can a small step in the chemical structure make a giant leap for a phase transition?
98. EVALUATION OF THE PROPERTIES OF THERMODIFUSION ZINC COATING OF COUPLINGS OF PUMP-COMPRESSOR PIPES PRODUCED BY «KSP STEEL»
99. Efficient and stable to coking catalysts of ethanol steam reforming comprised of Ni + Ru loaded on MgAl₂O₄ + LnFe_0.7Ni_0.3O₃ (Ln = La, Pr) nanocomposites prepared via cost-effective procedure with Pluronic P123 copolymer
100. Efficient and stable to coking catalysts of ethanol steam reforming comprised of Ni + Ru loaded on MgAl₂O₄ + LnFe_0.7Ni_0.3O₃ (Ln = La, Pr) nanocomposites prepared via cost-effective procedure with Pluronic P123 copolymer
1 2 3 4