Lezhnev S 1

1. Design of a New Technology for Stockpile of Open Pit Dumps During Integrated Development of Man-Made Waste
2. A Comparison of TiC Wetting Angles with Low Carbon Steel by Contact and Noncontact Methods
3. INFLUENCE OF STEPPED ANNEALING ON THE PROPERTIES OF CONDUCTOR WIRE AFTER INGOTLESS ROLLING-EXTRUSION AND DRAWING OF ALUMINUM ALLOYS CONTAINING Zr, Ce, La AND Fe
4. Effect of mechanical activation of natural filler on the properties of elastomeric composites
5. The use of rice husk ash as a potential filler in formulations of elastomeric compositions for rubber-metal vibration isolators
6. CLOSED PROBLEM OF PLASTICITY THEORY
7. DETERMINING THE PATTERNS OF ASYMMETRIC INTERACTION OF PLASTIC MEDIUM WITH COUNTER-DIRECTIONAL METAL FLOW
8. Development of the Theory of Additional Impact on the Deformation Zone from the Side of Rolling Rolls
9. EFFECT OF THE LIMITING DEFORMATION ZONE UNDER CONDITIONS OF ASYMMETRIC LOADING DURING ROLLING OF MEDIUM THICKNESS STRIPS
10. IDENTIFYING A MECHANISM FOR THE GRIPPING ABILITY OF ROLLS AND ROLLING AT A STABILITY LIMIT UNDER ASYMMETRIC LOADING
11. Investigation of the Influence of Deformation, Force, and Geometric Factors on the Roll Gripping Capacity and Stability of the Rolling Process
12. NEW DEVELOPMENT OF THE THEORETICAL BASES OF TRANSIENTS IN A CONTINUOUS GROUP OF BROADBAND MILL STANDS
13. SOLVING APPLIED PROBLEMS OF ELASTICITY THEORY IN GEOMECHANICS USING THE METHOD OF ARGUMENT FUNCTIONS OF A COMPLEX VARIABLE
14. ON THE ISSUE OF OBTAINING PARTS FROM HIGH SPEED STEELS BY SINTERING STEEL POWDER AND TITANIUM CARBIDE
15. CONCEPTS ANALYSIS OF ASYMMETRY FACTOR IMPLEMENTATION DURING ROLLING IN RELIEF ROLLS
16. INVESTIGATION OF FORCE PARAMETERS DURING ROLLING IN RELIEF ROLLS
17. MODIFICATION OF ELASTOMER COMPOSITES BY IONIZING RADIATION
18. Formation of Corrosion-Resistant Nitride Coatings Based on Ti–Al–Cr–Fe–Ni High-Entropy Alloy
19. Choosing the Design of a Radial-Shear Rolling Mill for Obtaining a Screw Profile
20. DEVELOPMENT AND COMPUTER SIMULATION OF A NEW TECHNOLOGY FOR FORMING AND STRENGTHENING SCREW FITTINGS
21. Development and Computer Simulation of the New Combined Process for Producing a Rebar Profile
22. Development and research of a new technology for the production of hardened screw fittings with a gradient ultrafine structure
23. Effect of asymmetric rolling in relief rolls on the microstructure evolution and mechanical properties of aluminum and copper workpieces
24. IMPROVEMENT AND RESEARCH OF A NEW COMBINED METHOD FOR PRODUCING SCREW FITTINGS USING COMPUTER MODELING
25. INVESTIGATION OF MICROSTRUCTURE AND ENERGY-POWER PARAMETERS IN THE SIMULATION OF A NEW TECHNOLOGY FOR THE PRODUCTION OF HARDENED SCREW FITTINGS
26. Recycling of stainless steel bar scrap by radial-shear rolling to obtain a gradient ultrafine-grained structure
27. SIMULATION OF THE FORGING PROCESS WITH AN ADDITIONAL MACRO-SHIFT IN “DEFORM” SOFTWARE PACKAGE
28. STUDY OF THE FORGING PROCESS IN A NEW DESIGN TOOL IMPLEMENTING ALTERNATING DEFORMATIONS
29. COMPUTER SIMULATION OF PRELIMINARY HEAT TREATMENT AND RADIAL-SHEAR ROLLING OF COPPER
30. COMPUTER SIMULATION OF PRELIMINARY HEAT TREATMENT AND RADIAL-SHEAR ROLLING OF BRASS
31. EFFECT OF SURFACE MODIFICATION OF 5KHV2S STEEL ON THE MECHANISM AND INTENSITY OF CONTACT WEAR
32. INVESTIGATION OF THE EFFECT OF COMBINED THERMOMECHANICAL PROCESSING ON THE BRASS MICROSTRUCTURE EVOLUTION AND THE MICROHARDNESS CHANGE
33. PHYSICAL-CHEMICAL MODELING AND INVESTIGATION OF THE “HIGH-ENTROPY METAL MATRIX /TiC” SYSTEM COMPONENTS INTERACTION
34. Realization of the innovative potential of radial-shear rolling for forming the structure and mechanical properties of aisi-321 austenitic stainless steel
35. Use of laser cladding for the synthesis of coatings from high-entropy alloys reinforced with ceramic particles
36. MATHEMATICAL MODELING OF NON-STATIONARY THERMAL STATE OF THE PROCESSED METAL DURING ITS LASER HARDENING
37. FEM Simulation of Rolling-Pressing Process with Horizontal and Vertical Rolls
38. Finite Element Modeling of ECAP-Linex Combined Process of Severe Plastic Deformation
39. Investigation of the Efficiency of Roll Profiles and Technological Schemes of Deformation of Asymmetric Rolling in Relief Rolls of C11000 Copper Alloy by FEM Simulation
40. Theoretical Study of the Force Parameters of the ECAP-Linex Combined Process
41. MODELLING THE EVOLUTION OF CASTING DEFECT CLOSURE BY RADIAL SHEAR ROLLING
42. EFFECT OF Al CONTENT ON THE MICROSTRUCTURE, MICROHARDNESS AND CORROSION RESISTANCE OF Al_xCoCrFeNiMo_0.5 HIGH-ENTROPY ALLOYS
43. Mechanism and patterns of wear of chrome steels with a surface-modified layer
44. ON THE ISSUE OF IMPROVING THE STRUCTURE OF TOOL STEELS
45. Universal method for contact fatigue determination
46. WEAR OF 16MnCrS5 STEEL SURFACE LAYERS IN THE PULSING CONTACT LOADS
47. FATIGUE PROPERTIES AND TRIBOLOGICAL TESTS OF AISI 316 STEEL AFTER HIGH PRESSURE TORSION
48. Strain state and microstructure evolution of aisi-316 austenitic stainless steel during high-pressure torsion (Hpt) process in the new stamp design
49. Thermomechanical treatment of steel using severe plastic deformation and cryogenic cooling
50. EFFECT OF ULTRASONIC PROCESSING ON THE PROPERTIES OF ULTRAFINEGRAINED BRASS
1 2