Department Of Civil And Environmental Engineering 2

51. Predictive Modeling and Experimental Validation for Assessing the Mechanical Properties of Cementitious Composites Made with Silica Fume and Ground Granulated Blast Furnace Slag
52. Toward sustainability: Integrating experimental study and data-driven modeling for eco-friendly paver blocks containing plastic waste
53. Factors influencing green building development in Kazakhstan
54. Advances in Surface Engineering and Biocompatible Coatings for Biomedical Applications
55. Biodegradable Polymer Matrix Composites Containing Graphene-Related Materials for Antibacterial Applications: A Critical Review
56. Comparative Effects of Fine and Conventional Shot Peening on Surface Morphology, Topography, Wettability, and Antibacterial Activity of Biomedical Ti6Al4V Alloy
57. Corrosion Behavior of Shot-Peened Ti6Al4V Alloy Produced via Pressure-Assisted Sintering
58. Editorial: Tribological behavior of biomaterials
59. Modification of surface and subsurface properties of aa1050 alloy by shot peening
60. Modification of surface and subsurface properties of cold-rolled Ti6Al4V sheets through water jet shot peening
61. Surface and Tribological Properties of Powder Metallurgical Cp-Ti Titanium Alloy Modified by Shot Peening
62. Analytical and Finite-Element-Method-Based Analyses of Pile Shaft Capacity Subjected to Rainfall Infiltration
63. High-suction polymer sensor for measurement of soil suction under freezing and thawing conditions
64. Variability of polymer for determination of soil-water characteristic curves
65. A GIS-Based emergency response and management support framework for Earthquake crisis: A case study of Antakya and Kahramanmaras earthquake in Turkey
66. Trace Heavy Metal Contamination of Urban Water Bodies in Central Asia: Its Distribution, Source Detection, and Probabilistic Health Risk Assessment for Recreational and Household Use of Water
67. Assessment of Reactive powder concrete subjected to three different sodium sulfate Concentrations: Compressive Strength, Absorption, Porosity, Microstructure, and durability
68. Optimization of mixture parameter for physical and mechanical properties of reactive powder concrete under external sulfate attack using Taguchi method
69. Performance-based approach to characterize external sulfate attack for reactive powder concrete
70. Evaluating the Efficacy of Limestone Powder as a Partial Replacement of Ordinary Portland Cement for the Sustainable Stabilization of Sulfate-Bearing Saline Soil
71. Self-sensing cementitious composites: Review and perspective
72. An innovative modelling technique for bimodal soil water characteristic curve under wetting process
73. Estimation of bimodal soil-water characteristics curve under wetting process
74. Global, regional, and national burden of household air pollution, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021
75. Structural responses of energy storage pile foundations under thermal-mechanical loadings
76. Sensitivity of energy performance to the selection of PCM melting temperature for the building located in Cfb climate zone
77. A Synoptic-and Remote Sensing-based Analysis of a Severe Dust Storm Event over Central Asia
78. Assessment of potential benefits of traffic and urban mobility reductions during COVID-19 lockdowns: dose-response calculations for material corrosions on built cultural heritage
79. Assessment of the association between dust storms and COVID-19 infection rate in southwest Iran
80. Destinations frequently impacted by dust storms originating from southwest Iran
81. Dynamic complex network analysis of PM_2.5 concentrations in the uk, using hierarchical directed graphs (V1.0.0)
82. Energy Generation and Carbon Footprint under Future Projections (2022–2100) of Central Asian Temperature Extremes
83. Extreme Temperature Events in Kazakhstan and Their Impacts on Public Health and Energy Demand
84. Health risk assessment of the European inhabitants exposed to contaminated ambient particulate matter by potentially toxic elements
85. Impact assessment of Beirut explosion on local and regional air quality
86. Impacts of ambient air pollution on UNESCO world cultural heritage sites in Eastern Asia: Dose-response calculations for material corrosions
87. The Escalating Threat of Heatwaves in Central Asia: Climate Change Impacts and Public Health Risks
88. Variability of Middle East springtime dust events between 2011 and 2022
89. Pandemic risks in PPPs: comparative analysis within developing countries
90. Regional stability and adaptation measures slope failures due to rainfall in Singapore
91. A Survey of Advanced Materials and Technologies for Energy Harvesting from Roadways
92. Structured soil mixture for solving deformation issue in GeoBarrier System
93. Experimental study on mitigating wind erosion of calcareous desert sand using spray method for microbially induced calcium carbonate precipitation
94. Long-term (2012–2020) PM₁₀ concentrations and increasing trends in the Sistan Basin: The role of Levar wind and synoptic meteorology
95. Bedform segregation and locking increase storage of natural and synthetic particles in rivers
96. Bedform segregation and locking increase storage of natural and synthetic particles in rivers
97. Real-Time Scanning Curve of Soil–Water Characteristic Curve for Sustainability of Residual Soil Slopes
98. Elucidating Best Geospatial Estimation Method Applied to Environmental Sciences
99. Multicomponent approach to optimize the performance of existing air quality networks. Practical applications
100. Soil density impact on soil-water characteristic curve and pore-size distribution
1 2 3 4 8