Department Of Metallurgy And Materials Science 1
1. Investigation of the Possibility of Obtaining Nickel-Containing Ferroalloys from Lateritic Nickel Ores by a Metallothermic Method
2. Study of Nickel–Chromium-Containing Ferroalloy Production
3. Effect of Minor Reinforcement with Ultrafine Industrial Microsilica Particles and T6 Heat Treatment on Mechanical Properties of Aluminum Matrix Composites
4. Microstructure and Mechanical Properties of Hybrid Pure Al/B4C/Microsilica Composites Produced by Ultrasonically Assisted Stir Casting
5. Development and Pilot-Scale Testing of Vibro-Briquetting Technology for Fine Chromite Raw Materials
6. Optimization of the Properties of Microsilica-Based Composite Briquettes Depending on Their Granulometry
7. Additional effect on the deformation zone during plastic metal flow
8. Know-How of the Effective Use of Carbon Electrodes with a through Axial Hole in the Smelting of Silicon Metal
9. Assessment of Silicon and Rhenium Recovery Efficiency from Copper-Containing Tailings of Processing Plants
10. STUDYING THE THERMOCHEMICAL CHARACTERISTICS OF SINTERING WITH ALKALI CONCENTRATE FROM WASTE COPPER TAILINGS
11. Carbothermic Reduction of Low-Grade Nickel Ores from the “Batamsha” Deposit: Modeling, Pilot-Scale Smelting, and Phase Analysis
12. Preliminary hydrogen reduction of iron from complex iron-bearing ores and subsequent liquid-phase separation
13. Selective Reduction of Iron from Iron–Manganese Ore of the Keregetas Deposit Using Hydrogen
14. Thermodynamic and Experimental Analysis of the Selective Reduction of Iron by Hydrogen from the Kergetas Iron–Manganese Ore
15. Research on the possibility of obtaining medium-carbon ferromanganese from the Djezdinskoe deposit
16. Synthesis of Silicon Carbide from Technogenic Waste: A Large-Scale Laboratory Study
17. A Comparative Study of Gold Leaching Kinetics Using Alternative Reagents from Concentrates of Low-Grade Ores
18. CHOICE RATIONALE OF MATERIALS FOR ROAD MARKING IN ORDER TO DEVELOP ITS PRODUCTION TECHNOLOGY
19. Effect of Imposed Shear During Oval-Caliber Rolling on the Properties of Mn–Si Low-Alloy Steel
20. Behavior of Phosphorus During Selective Reduction of Iron from Oolitic Ore and Separation of Reduction Products
21. Selective Reduction of Iron in High-Phosphorus Oolitic Ore from the Lisakovsk Deposit
22. Kinetics of Thickness Growth of Silicon Films During Pulsed Magnetron Sputtering Using the Caroline D12C System
23. Production of Metallurgical Sinter with Coke Modified by Spent Anode Material from Aluminum Electrolysis
24. INVESTIGATION OF THE STRESS-STRAIN STATE DURING NEW COMBINED DEFORMATION TECHNOLOGY
25. INVESTIGATION OF THE STRESS-STRAIN STATE DURING NEW COMBINED DEFORMATION TECHNOLOGY
26. Physicochemical characteristics of ferroalloys of the Cr–C–Si–Fe system
27. Studies of the Possibility of Improving the Quality of Iron Ores and Processing of Technogenic Composite Iron-Containing Waste of Metallurgical Production
28. Processing of Secondary Raw Materials from Ferrochrome Production via Agglomeration and Study of Their Mechanical Properties
29. Experimental Investigation of the Influence of Phase Compounds on the Friability of Fe-Si-Mn-Al Complex Alloy
1