Synthesis of Silicon Carbide from Technogenic Waste: A Large-Scale Laboratory Study
Makhambetov Y. Burumbayev A. Kelamanov B. Kabylkanov S. Zhakan A. Akhmetov A. Sadyk Z. Yücel O. Mukanov S.
February 2026Multidisciplinary Digital Publishing Institute (MDPI)
Processes
2026#14Issue 3
This study presents the results of an investigation into the carbothermic synthesis of silicon carbide (SiC) from microsilica and petroleum coke. The research combines thermodynamic modeling with experimental validation conducted in an ore-thermal furnace. Thermodynamic calculations were performed using the HSC Chemistry 10 software package to evaluate the influence of temperature and the SiO2/C ratio on phase formation and the conditions of SiC synthesis. The results show that the synthesis process exhibits a strong dependence on temperature and is largely governed by the carbon balance of the charge. At an SiO2/C ratio of 1, the system is carbon-rich, which promotes effective reduction of silicon dioxide. However, at elevated temperatures, these conditions intensify gas-phase reactions and lead to increased silicon losses. The most favorable conditions for silicon carbide formation were achieved at an SiO2/C ratio of 1.5, which is close to the stoichiometric value. This conclusion is confirmed by the maximum degree of SiC recovery obtained under experimental conditions. In contrast, at an SiO2/C ratio of 2, carbon deficiency results in incomplete reduction in SiO2 and a lower yield of the target product. The phase composition of the synthesized samples was analyzed by X-ray diffraction, revealing β-SiC as the dominant crystalline phase. The morphology and structure of the materials were examined using scanning electron microscopy, which confirmed the formation of SiC particles and aggregates with characteristic features. A comparison between calculated and experimental results demonstrates that thermodynamic modeling adequately describes the main trends of the process and can be effectively applied to optimize SiC synthesis conditions during the processing of technogenic silica-containing waste.
briquetting , carbothermic synthesis , HSC Chemistry 10 , microsilica , ore-thermal furnace , petroleum coke , silicon carbide , thermodynamic modeling
Text of the article Перейти на текст статьи
Chemical-Metallurgical Institute Named After Zh. Abishev, Karaganda, 100030, Kazakhstan
Department of Metallurgy and Materials Science, Faculty of Metallurgy and Mechanical Engineering, Karaganda Industrial University, Temirtau, 101400, Kazakhstan
Department of Metallurgy and Mining Engineering, Faculty of Engineering, Aktobe Regioanal University Named After K. Zhubanov, Aktobe, 030000, Kazakhstan
Department of Metallurgical and Materials Engineering, Faculty of Chemical and Metallurgical Engineering, Istanbul Technical University, Istanbul, 34469, Turkey
Chemical-Metallurgical Institute Named After Zh. Abishev
Department of Metallurgy and Materials Science
Department of Metallurgy and Mining Engineering
Department of Metallurgical and Materials Engineering
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026