Department Of Metallurgical And Materials Engineering 1
1. Co Catalysts Supported on Activated Clay for Selective Hydrogenation of Acetylene to Ethylene
2. Biocompatibility and Corrosion of Microplasma-Sprayed Titanium and Tantalum Coatings versus Titanium Alloy
3. Improving Corrosion and Wear Resistance of 316L Stainless Steel via In Situ Pure Ti and Ti6Al4V Coatings: Tribocorrosion and Electrochemical Analysis
4. Microplasma-Sprayed Titanium and Hydroxyapatite Coatings on Ti6Al4V Alloy: in vitro Biocompatibility and Corrosion Resistance: Part I
5. Microplasma-Sprayed Titanium and Hydroxyapatite Coatings on Ti6Al4V Alloy: in vitro Biocompatibility and Corrosion Resistance: Part II
6. Magnetron Sputtering of Antibacterial and Antifungal Tantalum-Copper and Niobium-Copper Coatings on Three Dimensional-Printed Porous Titanium Alloy Scaffolds: Part I
7. Magnetron Sputtering of Antibacterial and Antifungal Tantalum-Copper and Niobium-Copper Coatings on Three Dimensional-Printed Porous Titanium Alloy Scaffolds: Part II
8. Extraction of non-ferrous metals and rhenium from lead dusts of copper production
9. Investigation of Annealing Temperature Effect on Structure and Biofunction in Metal Alloy Implant Production
10. Selective Hydrochloric Acid Leaching of Zinc, Lead and Silver from Mechanically Activated Zinc Plant Residue
11. Sustainable lightweight concrete using waste-derived heavy fuel oil ash as a phase change material carrier: Thermal energy storage and structural performance in buildings
12. Recovery of Light Rare Earth Elements from Coal Ash via Tartaric Acid and Magnesium Sulfate Leaching
13. Exothermic Effects and Viscosity of Oxide Melts Formed During High-Temperature Reduction of Cr–Mn Ore Systems
14. Synthesis of Silicon Carbide from Technogenic Waste: A Large-Scale Laboratory Study
15. Dissolution of Chalcopyrite in Presence of Chelating Agent and Hydrogen Peroxide
16. Obtaining Symmetrical Gradient Structure in Copper Wire by Combined Processing
1