Know-How of the Effective Use of Carbon Electrodes with a through Axial Hole in the Smelting of Silicon Metal
Ilin A.A. Yerzhanov A.S. Zobnin N.N. Nemchinova N.V. Romanov V.I.
September 2024Multidisciplinary Digital Publishing Institute (MDPI)
Applied Sciences (Switzerland)
2024#14Issue 18
This article describes elements of the know-how of using carbon electrodes produced using the technology of molding around a rod when smelting silicon metal. Application of our know-how will dramatically increase the competitiveness of silicon metal production. Experts’ concerns regarding the use of such electrodes were that such electrodes have a through axial hole. This significantly reduces the mechanical strength of such electrodes, which can presumably lead to problems associated with the breakage of the working side of the electrode, which is immersed in the smelting space of the furnace under the charge layer. Industrial testing of such electrodes was carried out in a 30 MVA furnace of “Tau-Ken Temir” LLP. During testing, we used an approach previously developed by our team for working with a furnace in the process of smelting silicon metal. In particular, we used an interval between top treatments of about 30 min and adhered to the principles of balanced smelting, i.e., provided a balance between the intensity of the uniform supply of the charge into the furnace and the current active electrical power. Industrial testing carried out over four weeks confirmed the stability of the operation of cheaper carbon electrodes with a through axial hole. The recovery of silicon into finished products was also improved to 88–89% and the specific energy consumption was reduced to 11.2–12.1 MWh/t of silicon metal from the initial value 14,752 MWh/t. Thus, we received additional evidence for the effectiveness of our approach in furnace operating compared to an approach based on the ultimate provision of gas and permeability of the furnace top due to excessively intense processing of the top and an uncontrolled, uneven supply of charge to the furnace.
axial hole carbon electrode , balanced smelting , cost reduction , silicon metal production , silicon recovery , specific energy consumption , submerged arc furnace (SAF)
Text of the article Перейти на текст статьи
Department of Metallurgy and Materials Science, Karaganda Industrial University, Temirtau, 101400, Kazakhstan
Department of Non-Ferrous Metals Metallurgy, National Research Technical University, Irkutsk, 664074, Russian Federation
Department of Metallurgy and Materials Science
Department of Non-Ferrous Metals Metallurgy
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026