Processing of Secondary Raw Materials from Ferrochrome Production via Agglomeration and Study of Their Mechanical Properties

Zhumagaliyev Y. Shabanov Y. Almagambetov M. Jundibayev M. Ulmaganbetov N. Laikhan S. Jundibayeva A. Abilberikova A. Ubaidulayeva N. Adaibayeva R.
August 2025 Multidisciplinary Digital Publishing Institute (MDPI)

Metals
2025 #15 Issue 8

In the process of producing ferroalloys, a large amount of secondary raw materials is formed, including slag, aspiration dusts and sludge. The recycling of secondary raw materials can create resources and bring environmental and economic benefits. Wet secondary raw materials (WSRMs) are characterized by a high chromium oxide content (averaging 24%), but due to their high moisture levels, they cannot be directly used in arc furnaces. As a strategic approach, mixing WSRMs with drier, more chromium-rich dusts (up to 45% Cr₂O₃) has been proposed. This not only reduces the overall moisture content of the mixture but also enhances the metallurgical value of the charge material. This paper presents the results of laboratory studies on the agglomeration of secondary wet raw materials using briquetting, extrusion and pelletizing methods. The main factors influencing the quality of the resulting product were analyzed, including the method of agglomeration, the composition of the mixture, as well as the type and dosage of the binder component. The strength characteristics of the finished agglomerated samples were evaluated in terms of resistance to splitting, impact loads and falling. Notably, the selected binders are organic and polymer substances capable of complete combustion under metallurgical smelting conditions.

agglomeration , binder , braxes , briquettes , ferrochrome , pellets , strength characteristics

Text of the article Перейти на текст статьи

Department of Metallurgy and Mining, K. Zhubanov Aktobe Regional University, Aktobe, 030000, Kazakhstan
ERG Research and Engineering Center, Astana, 010000, Kazakhstan
Department of Metallurgy and Materials Science, Karaganda Industrial University, Temirtau, 101400, Kazakhstan

Department of Metallurgy and Mining
ERG Research and Engineering Center
Department of Metallurgy and Materials Science

10 лет помогаем публиковать статьи Международный издатель

Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026