Department Of Metallurgy And Mining 1

1. Investigation of the Possibility of Obtaining Nickel-Containing Ferroalloys from Lateritic Nickel Ores by a Metallothermic Method
2. Study of Nickel–Chromium-Containing Ferroalloy Production
3. Thermodynamic and Pilot-Scale Experimental Analysis of Medium-Carbon Ferromanganese Production
4. Effect of Minor Reinforcement with Ultrafine Industrial Microsilica Particles and T6 Heat Treatment on Mechanical Properties of Aluminum Matrix Composites
5. Improving Mechanical Properties of Low-Quality Pure Aluminum by Minor Reinforcement with Fine B₄C Particles and T6 Heat Treatment
6. Development and Pilot-Scale Testing of Vibro-Briquetting Technology for Fine Chromite Raw Materials
7. Selection of Binder Materials for the Production of Extruded Briquettes
8. Mine surveying technique and steel storage tank base deformation removal
9. Advancing A Generalized Method For Solving Problems Of Continuum Mechanics As Applied To The Cartesian Coordinate System
10. DETERMINING THE PATTERNS OF ASYMMETRIC INTERACTION OF PLASTIC MEDIUM WITH COUNTER-DIRECTIONAL METAL FLOW
11. DETERMINING THE PATTERNS OF ASYMMETRIC INTERACTION OF PLASTIC MEDIUM WITH COUNTER-DIRECTIONAL METAL FLOW
12. DETERMINING THE PATTERNS OF ASYMMETRIC INTERACTION OF PLASTIC MEDIUM WITH COUNTER-DIRECTIONAL METAL FLOW
13. DETERMINING THE PATTERNS OF ASYMMETRIC INTERACTION OF PLASTIC MEDIUM WITH COUNTER-DIRECTIONAL METAL FLOW
14. IDENTIFYING A MECHANISM FOR THE GRIPPING ABILITY OF ROLLS AND ROLLING AT A STABILITY LIMIT UNDER ASYMMETRIC LOADING
15. IDENTIFYING A MECHANISM FOR THE GRIPPING ABILITY OF ROLLS AND ROLLING AT A STABILITY LIMIT UNDER ASYMMETRIC LOADING
16. IDENTIFYING A MECHANISM FOR THE GRIPPING ABILITY OF ROLLS AND ROLLING AT A STABILITY LIMIT UNDER ASYMMETRIC LOADING
17. IDENTIFYING A MECHANISM FOR THE GRIPPING ABILITY OF ROLLS AND ROLLING AT A STABILITY LIMIT UNDER ASYMMETRIC LOADING
18. Carbothermic Reduction of Low-Grade Nickel Ores from the “Batamsha” Deposit: Modeling, Pilot-Scale Smelting, and Phase Analysis
19. Technological Analysis of the Production of Nickel-Containing Composite Materials
20. Modeling of Non‐Ferrous Metallurgy Waste Disposal with the Production of Iron Silicides and Zinc Distillation
21. Preliminary hydrogen reduction of iron from complex iron-bearing ores and subsequent liquid-phase separation
22. Selective Reduction of Iron from Iron–Manganese Ore of the Keregetas Deposit Using Hydrogen
23. Thermodynamic and Experimental Analysis of the Selective Reduction of Iron by Hydrogen from the Kergetas Iron–Manganese Ore
24. Methodology for investigation the properties of coal waste to assess their suitability in construction
25. Resource-Efficient Smelting Technology for FeCrMnSi Ferroalloy Production from Technogenic Wastes in an Ore-Thermal Furnace
26. Physico-Chemical Study of the Possibility of Utilization of Coal Ash by Processing as Secondary Raw Materials to Obtain a Composite Cement Clinker
27. Realization of the innovative potential of radial-shear rolling for forming the structure and mechanical properties of aisi-321 austenitic stainless steel
28. Analysis and Chromium Recovery from Ferrochrome Waste (Stockpiled Refined Ferrochrome Slags)
29. Assessment of Physicochemical Properties of Dust from Crushing High-Carbon Ferrochrome: Methods for Agglomeration
30. Development of a Briquetting Method for Dust from High-Carbon Ferrochrome (HC FeCr) Crushing Using Vibropressing on an Industrial Scale and Its Subsequent Remelting
31. Exploring Alloy Composition Dynamics: Thermodynamic Analysis of Fe-Al-Si-Cr System in Homogeneous Liquid State
32. Pilot Tests of Pre-Reduction in Chromium Raw Materials from Donskoy Ore Mining and Processing Plant and Melting of High-Carbon Ferrochromium
33. Behavior of Phosphorus During Selective Reduction of Iron from Oolitic Ore and Separation of Reduction Products
34. Dephosphorization of High-Phosphorus Oolitic Iron Ore By Prereduction with Carbon Monoxide Followed By Smelting
35. Selective Reduction of Iron in High-Phosphorus Oolitic Ore from the Lisakovsk Deposit
36. Recognition of Stages of Endogenous Fire Outbreak and Development in Coal Mines
37. Production of Metallurgical Sinter with Coke Modified by Spent Anode Material from Aluminum Electrolysis
38. Development of a Thermomechanical Treatment Mode for Stainless-Steel Rings
39. Hardening of Bimetallic Wires from Secondary Materials Used in the Construction of Power Lines
40. Study of changes in microstructure and metal interface Cu/Al during bimetallic construction wire straining
41. Study of the Properties of Antifriction Rings under Severe Plastic Deformation
42. Study of the Properties of Antifriction Rings under Severe Plastic Deformation
43. Physicochemical characteristics of ferroalloys of the Cr–C–Si–Fe system
44. Studies of the Possibility of Improving the Quality of Iron Ores and Processing of Technogenic Composite Iron-Containing Waste of Metallurgical Production
45. Energy Efficiency Trends in Petroleum Extraction: A Bibliometric Study
46. Thermophysical indicators of elaborated sandwich cladding constructions with heat-reflective coverings and air gaps
47. Processing of Secondary Raw Materials from Ferrochrome Production via Agglomeration and Study of Their Mechanical Properties
48. Experimental Investigation of the Influence of Phase Compounds on the Friability of Fe-Si-Mn-Al Complex Alloy
1