Department Of Chemical And Materials Engineering 5

201. Design and characterization of 3D printed pore gradient hydrogel scaffold for bone tissue engineering
202. Optimizing scaffold pore size for tissue engineering: insights across various tissue types
203. Carbon monoxide formation during the co-firing of coal and biomass waste fuels in a 10 kW_th bubbling fluidized bed rig under oxy-fuel combustion conditions
204. Combustion behavior of solid waste fuels in the vertical tube reactor under different oxy-fuel environments
205. Slow pyrolysis of flax straw biomass produced in Kazakhstan: Characterization of enhanced tar and high-quality biochar
206. High-performance Na₃V₂(PO₄)₃/C cathode for efficient low-temperature lithium-ion batteries
207. Modified Pechini-derived Na₃V₂(PO₄)₃/C with superior low-temperature performance for sodium-ion batteries
208. Micellization Behavior and Thermodynamic Characteristics of Saponin and SDS: The Impact of Silica Nanoparticles for Subsurface Formation Interaction Studies
209. Quantitative Characterization of Metal Powder Morphology, Size Distribution, and Flowability for Additive Manufacturing
210. Effect of pre-treatment conditions on the electrochemical performance of hard carbon derived from bio-waste
211. Additive-driven interfacial chemistry as the key to stabilizing lithium metal anodes
212. Density functional theory insights into decorated, doped, and defective graphene as a model system for understanding hydrogen storage in carbon materials
213. Density Functional Theory Investigation of Intermolecular Interactions for Hydrogen-Bonded Deep Eutectic Solvents
214. Hydrogen adsorption on pristine and modified graphene: DFT insights into defects, doping, and decoration
215. Review: chitosan-based biopolymers for anion-exchange membrane fuel cell application
216. Towards high-performance sodium-ion batteries: A comprehensive review on Na_xNi_yFe_zMn₁₋₍_y₊_z₎O₂ cathode materials
217. Human exposure to aerosol from indoor gas stove cooking and the resulting cardiovascular system responses
218. Interaction of Cooking-Generated Aerosols on the Human Nervous System and the Impact of Caloric Restriction Post-Exposure
219. Effect of magnetic field on the rate performance of a Fe₂O₃/LiFePO₄ composite cathode for Li-ion batteries
220. Controlling the Growth of Cs₂PbX₄ Nanostructures Enhances the Stability of Inorganic Cesium-Based Perovskite Solar Cells for Potential Low Earth Orbit Applications
221. Photoactive nanomaterials
222. Crosslinked polytetrahydrofuran-based solid-state electrolytes with improved mechanical stability and electrochemical performance
223. PTHF/LATP Composite Polymer Electrolyte for Solid State Batteries
224. Structural and Chemical Modifications Towards High-Performance of Triboelectric Nanogenerators
225. A comparative study of bulk and surface W-doped high-Ni cathode materials for lithium-ion batteries
226. Revealing Phase Transition in Ni-Rich Cathodes via a Nondestructive Entropymetry Method
227. The Helicenes: Potential Carriers of Diffuse Interstellar Bands
228. Plasmon Effect of Silver Nanoparticles on the Sensitization of Titanium Dioxide Nanorods with N719 Dye
229. Chemical characterization and source apportionment of atmospheric fine particulate matter (PM_2.5) at an urban site in Astana, Kazakhstan
230. Particulate black carbon mass concentrations and the episodic source identification driven by atmospheric blocking effects in Astana, Kazakhstan
231. Wire- and powder-based direct energy deposition of NiTi-CuSn10-SS316L
232. A Novel Method for the Determination of the Lateral Dimensions of 2D Rectangular Flakes
233. Obtaining the Dimensions and Orientation of 2D Rectangular Flakes from Sectioning Experiments in Flake Composites
234. ROS-Responsive Fluorinated Oxalate Nanomedicine for Dual Chemiluminescence/¹⁹F MRI Imaging and Targeted Drug Release
235. Carbon nanotubes assembled on porous TiO₂matrix doped with Co₃O₄as sulfur host for lithium-sulfur batteries
236. Phase Behavior of Partially Charged Polyelectrolyte Solutions with Salt: A Theoretical Study
237. Enhancing low-temperature characteristics of graphite anode by comprehensive modification of electrolyte
238. Innovative microwave and continuous flow synthesis of 5-Hydroxymethylfurfural from Biomass-Derived Resources using Deep eutectic solvents
239. Modeling Solubility of Acetylsalicylic Acid in Aspen Plus
240. Efficient Polysulfides Conversion Kinetics Enabled by Ni@CNF Interlayer for Lithium Sulfur Batteries
241. Nickel and nickel oxide nanoparticle-embedded functional carbon nanofibers for lithium sulfur batteries
242. Biofilm Detection by a Fiber-Tip Ball Resonator Optical Fiber Sensor
243. Polyacrylamide-based hydrogel electrolyte for modulating water activity in aqueous hybrid batteries
244. Application of Response Surface Methodology for Optimization of Nanosized Zinc Oxide Synthesis Conditions by Electrospinning Technique
245. Corrigendum to “Nanofibrous ZnO-loaded PVA/PEDOT:PSS for selective and enhanced ammonia detection” [Sens. Actuators B: Chem. 426 (2025), 137022] (Sensors and Actuators: B. Chemical (2025) 426, (S0925400524017520), (10.1016/j.snb.2024.137022))
246. Nanofibrous ZnO-loaded PVA/PEDOT:PSS for selective and enhanced ammonia detection
247. Free-standing SnSe@C nanofiber anode material for low-temperature lithium-ion batteries
248. Durable Cu-doped P3-type Na_0.62Mn_0.75Cu_0.19O₂ cathodes for high-capacity sodium-ion batteries
249. Preparation of Fe-doped Na₂Mn₃O₇ and its Application as a Cathode Material for Sodium-ion Batteries
250. Present development and future perspectives on biowaste-derived hard carbon anodes for room temperature sodium-ion batteries
1 3 4 5 6 7 8