Department Of Chemical And Materials Engineering 6

251. Recent Advances in Layered Na₂Mn₃O₇ Cathode Materials for Sodium-Ion Batteries
252. Stabilizing Porous-Silicon Photocathodes Via Nickel/Nickel Oxide Co-Catalyst and Benzotriazole Passivation
253. Mechanical characteristics of CSA-treated sand reinforced with fiber under freeze-thaw cycles
254. Influence of Mo and Fe on Photosynthetic and Nitrogenase Activities of Nitrogen-Fixing Cyanobacteria under Nitrogen Starvation
255. Microalgae as a key tool in achieving carbon neutrality for bioproduct production
256. Synthetic algocyanobacterial consortium as an alternative to chemical fertilizers
257. Precursor concentration-driven structural evolution and phosphate distribution in electrospun zinc phosphate-carbon nanofibers for lithium-ion storage
258. Changes in the Secondary Structure and Assembly of Proteins on Fluoride Ceramic (CeF₃) Nanoparticle Surfaces
259. Effect of Horizontal Vibrations and Particle Size on the Packing Density of Multi-Sized Sphere Mixtures: Discrete Element Method Simulation
260. A comparative assessment of black carbon emissions during heating 17 commercial cooking oils
261. Prospects of cyanobacterial pigment production: Biotechnological potential and optimization strategies
262. Development and validation of a novel process model for fluidized bed combustion: Application for efficient combustion of low-grade coal
263. Fabrication of Highly Compacted Green Body Using Multi-Sized Al Powder under a Centrifugal Force
264. Thermal, hardness, and tribological assessment of PEEK/CoCr composites
265. Thermal properties and mechanical behavior of hot pressed PEEK/graphite thin film laminate composites
266. Microalgae- and cyanobacteria-derived phytostimulants for mitigation of salt stress and improved agriculture
267. Enhanced interfacial thermal conductance across Si/defected SiC interface
268. Thermal transport recovery in irradiated SiC mediated by nano-layered stacking faults
269. Plasmonic effect of metal nanoparticles on the photocatalytic properties of TiO₂/rGO composite
270. Novel Li/Li_xSn_y thin film designed as an anode for lithium-ion microbatteries
271. Size Effect of Gold Nanoparticles on the Photocatalytic Activity of Titanium Dioxide/Reduced Graphene Oxide (TiO₂/rGO) Nanocomposite
272. Methodological insights into sulfur immobilization techniques on commercial carbon for lithium-sulfur batteries
273. Boron-doped, lithium-decorated graphene layer for hydrogen storage technologies
274. Enhanced electrochemical performance of sodium cathode materials with partial substitution of Zr
275. The role of chemisorption and physisorption in Fe-doped SnO₂ acetone sensors
276. Analysis of dead-core formation in catalytic reaction and diffusion processes with generalized diffusion flux
277. Critical Thiele Modulus for Diffusion-Reaction Problems in Catalyst Slabs With Generalized Langmuir-Hinshelwood Kinetics
278. Dead-core solutions to fast diffusion–reaction equation for catalyst slabs with power-law reaction kinetics and external mass transfer resistance
279. Collagen Fibril Diameter Distribution of Sheep Anterior Cruciate Ligament
280. Sensitivity Enhancement of CO₂ Sensors at Room Temperature Based on the CZO Nanorod Architecture
281. A Short Review of Density Functional Theory Studies into Hydrogen Storage in Metal-Organic Frameworks
282. Defective ZnO_x@porous carbon nanofiber network inducing dendrite-free zinc plating as zinc metal anode for high-performance aqueous rechargeable Zn/Na₄Mn₉O₁₈ battery based on hybrid electrolyte
283. In-situ constructed accordion-like Nb₂C/Nb₂O₅ heterostructure as efficient catalyzer towards high-performance lithium-sulfur batteries
284. NiCo₂S₄ nanoparticles embedded in nitrogen-doped carbon nanotubes networks as effective sulfur carriers for advanced Lithium–Sulfur batteries
285. Oxidized Nb₂C MXene as catalysts for lithium-sulfur batteries: Mitigating the shuttle phenomenon by facilitating catalytic conversion of lithium polysulfides
286. Prussian blue analogs derived Fe-Ni-P@nitrogen-doped carbon composites as sulfur host for high-performance lithium-sulfur batteries
287. Mapping non-conventional atmospheric drinking-water harvesting opportunities in Central Eurasia: The case of Kazakhstan
288. Attrition of high ash Ekibastuz coal in a bench scale fluidized bed rig under O₂/N₂ and O₂/CO₂ environments
289. Co-Firing of Refuse-Derived Fuel with Ekibastuz Coal in a Bubbling Fluidized Bed Reactor: Analysis of Emissions and Ash Characteristics
290. Kaolin-based composite polymer membrane for highly efficient batteries in energy storage systems
291. Advances of graphene-based aerogels and their modifications in lithium-sulfur batteries
292. Enhancing lithium-sulfur battery performance with biomass-derived graphene-like porous carbon and NiO nanoparticles composites
293. Graphene-like porous carbon-titanium nitride composite as an efficient separator modifier for lithium-sulfur batteries
294. The role of graphene aerogels in rechargeable batteries
295. Multiscale design of metal oxide semiconductor gas sensors: A DFT-driven perspective on structure–property–function relationships
296. In-Depth Exergy Analysis of the Thermochemical Conversion of Flax Straw via Pyrolysis
297. Process simulation of flax straw pyrolysis with kinetic reaction Model: Experimental validation and exergy analysis
298. Indium Gallium Zinc Oxide Thin Films as Emerging Photoelectrode Materials for Efficient Solar Water Splitting
299. Photocatalytic optimization of ZnO-Ga₂O₃ composite thin films for PEC water splitting: effects of thickness, environment, and annealing temperature
300. Effect of surface grafting on the oil–water mixture passing through a nanoslit: a molecular dynamics simulation study
1 4 5 6 7 8