Methodological insights into sulfur immobilization techniques on commercial carbon for lithium-sulfur batteries

Shinkarova Y. Tursynbek M. Kenzhebek M. Tatykayev B. Supiyeva Z. Kerimkul T. Sultanov F. Mentbayeva A.
11 September 2025 Royal Society of Chemistry

RSC Advances
2025 #15 Issue 40 33443 - 33455 pp.

Lithium-sulfur batteries (LSBs) are considered as some of the most promising next-generation energy storage systems due to their high theoretical capacity and energy density. However, their practical application is hindered by challenges such as the shuttle effect, low conductivity of sulfur, and volume changes during cycling. A key factor to address these issues is the strategy used to incorporate sulfur into the carbon host, which significantly affects the cathode structure and electrochemical performance. In this study, we compare four distinct sulfur immobilization strategies - chemical precipitation (ChP), ball milling infiltration (BM), dissolution-crystallization (DC), and melt diffusion (MD) - using acetylene black (AB) as a conventional conductive carbon host. Each method yields AB@S composites with varying sulfur distributions, loading efficiencies, and interfacial characteristics. Comprehensive morphological and electrochemical characterization, including thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and X-ray diffraction (XRD), confirms differences in sulfur content, particle morphology, and crystalline structure depending on the infiltration route. Electrochemical testing reveals that the synthesis approach is critical in determining the redox kinetics, reversibility, and cycling stability of Li-S batteries. Among the tested approaches, the AB@S cathode fabricated via the BM method delivers the most balanced performance, showing a comparatively high initial discharge capacity of 816 mAh g⁻¹ at 0.1C, improved coulombic efficiency, and enhanced long-term cycling stability, retaining 68% of capacity, unlike DC and MD (about 60%) and ChP (55%) cells.

Text of the article Перейти на текст статьи

Institute of Batteries LLC, Kabanbay Batyr Ave. 53, Astana, 010000, Kazakhstan
Department of Chemical and Materials Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Kabanbay Batyr Ave. 53, Astana, 010000, Kazakhstan
National Laboratory Astana, Nazarbayev University, Kabanbay Batyr Ave. 53, Astana, 010000, Kazakhstan
Satbayev University, Almaty, 050013, Kazakhstan
Faculty of Chemistry and Chemical Technology, al-Farabi Kazakh National University, 71 Al-Farabi Ave, Almaty, 050013, Kazakhstan

Institute of Batteries LLC
Department of Chemical and Materials Engineering
National Laboratory Astana
Satbayev University
Faculty of Chemistry and Chemical Technology

10 лет помогаем публиковать статьи Международный издатель

Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026