MDPI 8

351. Effect of Bilayer Thickness and Bias Potential on the Structure and Properties of (TiZr/Nb)N Multilayer Coatings as a Result of Arc-PVD Deposition
352. Effect of CaO, Al₂O₃, and MgO Supports of Ni Catalysts on the Formation of Graphite-like Carbon Species during the Boudouard Reaction and Methane Cracking
353. Effect of Heat Treatment on the Structural-Phase State and Properties of a Multilayer Co-Cr-Al-Y Coating
354. Effect of Heavy-Metal-Resistant PGPR Inoculants on Growth, Rhizosphere Microbiome and Remediation Potential of Miscanthus × giganteus in Zinc-Contaminated Soil
355. Effect of Irradiation with Low-Energy He²⁺ Ions on Degradation of Structural, Strength and Heat-Conducting Properties of BeO Ceramics
356. Effect of Lanthanum Sorption on the Behavior of Rarely Crosslinked Acidic and Basic Polymer Hydrogels during Remote Interaction
357. Effect of Magnetron Sputtering Deposition Conditions on the Mechanical and Tribological Properties of Wear-Resistant Titanium Carbonitride Coatings
358. Effect of Microwave Irradiation at Different Stages of Manufacturing Unsaturated Polyester Nanocomposite
359. Effect of Nanodiamond Sizes on the Efficiency of the Quasi-Specular Reflection of Cold Neutrons
360. Effect of New Design of the Laser Installation and Spraying Method on the Physical and Mechanical Properties the Inner Surface a Small Diameter Coated with 15Cr17Ni12V3F35ZrO₂
361. Effect of particle sizes on the efficiency of fluorinated nanodiamond neutron reflectors
362. Effect of Phosphorus and Chlorine Containing Plasticizers on the Physicochemical and Mechanical Properties of Epoxy Composites
363. Effect of Precursor Prehistory on the Efficiency of Radiation-Assisted Synthesis and Luminescence of YAG:Ce Ceramics
364. Effect of Rotational Speed and Gap between Rotating Knives of the Grinder on the Yield Stress and Water-Binding Capacity of Fine Ground Chicken Bone
365. Effect of the COVID-19 Pandemic on Renewable Energy Firm’s Profitability and Capitalization
366. Effect of the Dislocation Substructure Parameters of Hadfield Steel on Its Strain Hardening
367. Effect of the Wetting Hydraulic Property of Soil on 1-D Water Infiltration
368. Effect of Thermal and Hydrothermal Accelerated Aging on 3D Printed Polylactic Acid
369. Effect of Total Mixed Ratio (TMR) Supplementation on Milk Nutritive Value and Mineral Status of Female Camels and Their Calves (Camelus dromedarius) Raised under Semi Intensive System during Winter
370. Effect of Two Seeding Rates on Nitrogen Yield and Nitrogen Fixation of Winter and Spring Faba Bean
371. Effect of Water-Air Microemulsion of Flotation Agent Solution on Flotation of Polymetallic Sulfide Ores
372. Effectiveness of Bio-Waste-Derived Carbon Doping on De-Icing Performance of an Electrically Resistant Concrete
373. Effects of Electron Beam Irradiation on Mechanical and Tribological Properties of PEEK
374. Effects of Heavy Rainfall on Shallow Foundations in Bukit Timah Granite in Singapore
375. Effects of Internal Exposure of Radioactive ⁵⁶MnO₂ Particles on the Lung in C57BL Mice
376. Effects of low-dose atorvastatin on the peripheral blood mononuclear cell secretion of angiogenic factors in type 2 diabetes
377. Effects of Melt Temperature and Non-Isothermal Flow in Design of Coat Hanger Dies Based on Flow Network of Non-Newtonian Fluids
378. Efficacy of a Biocidal Paint in Controlling Alphitobius diaperinus (Panzer) (Coleoptera: Tenebrionidae) and Improving the Quality of Air and Litter in Poultry Houses
379. Efficiency and Prospects of the Use of Mechanochemical Treatment to Obtain Innovative Composite Systems
380. Efficiency enhancement in double‐pass perforated glazed solar air heaters with porous beds: Taguchi‐artificial neural network optimization and cost–benefit analysis
381. Efficient Catalysts of Ethanol Steam Reforming Based on Perovskite-Fluorite Nanocomposites with Supported Ni: Effect of the Synthesis Methods on the Activity and Stability
382. Efficient Recovery Annealing of the Pseudocapacitive Electrode with a High Loading of Cobalt Oxide Nanoparticles for Hybrid Supercapacitor Applications
383. EFND: A Semantic, Visual, and Socially Augmented Deep Framework for Extreme Fake News Detection
384. Electric Energy Storage Effect in Hydrated ZrO₂-Nanostructured System
385. Electric motors for variable-speed drive of lock valves
386. Electrical and Structural Characterization of Few-Layer Graphene Sheets on Quartz
387. Electrochemical Characteristics of Shewanella loihica PV-4 on Reticulated Vitreous Carbon (RVC) with Different Potentials Applied
388. Electrochemical Performance of Chemically Activated Carbons from Sawdust as Supercapacitor Electrodes
389. Electron as a Tiny Mirror: Radiation from a Worldline with Asymptotic Inertia
390. Electron Beam-Assisted Synthesis of YAG:Ce Ceramics
391. Electronic Properties and Chemical Bonding in V₂FeSi and Fe₂VSi Heusler Alloys
392. Elevated Levels of Plasma Collagen Triple Helix Repeat Containing 1 (CTHRC1) Are Strongly Associated with eGFR and Albuminuria in Chronic Kidney Disease
393. Emerging and Recycling of Li-Ion Batteries to Aid in Energy Storage, A Review
394. Emotional Speech Recognition Method Based on Word Transcription
395. Endogenous piRNAs Can Interact with the Omicron Variant of the SARS-CoV-2 Genome
396. Endurance training depletes antioxidant system but does not affect endothelial functions in women with abdominal obesity: A randomized trial with a comparison to endurance-strength training
397. Energy Costs Impact on Disabled Children’s Rehabilitation Opportunities in Kazakhstan
398. Engineering of recombinant sheep pox viruses expressing foreign antigens
399. Enhanced antimicrobial action of chlorhexidine loaded in shellac nanoparticles with cationic surface functionality
400. Enhanced Sorption of Europium and Scandium Ions from Nitrate Solutions by Remotely Activated Ion Exchangers
1 6 7 8 9 10 26