G.V. Kurdyumov Institute for Metal Physics of N.A.S. of Ukraine 1

1. ADDITIVE TECHNOLOGIES FOR 3D PRINTING WITH METALS
2. Analysis of Deformation Forces in Simulation of a New Thermomechanical Wire Processing
3. APPLICATION OF CRYOGENIC TECHNOLOGIES IN DEFORMATION PROCESSING OF METALS
4. Change of Mechanical Properties of Bars in the Process of Deformation by Combined Method
5. Comparative Analysis of Products of the Fullerenes’ and Carbon-Nanostructures’ Synthesis Using the SIGE and FGDG-7 Grades of Graphite
6. Creation and Comparison of Properties of Composites Based on Ceramics Filled with Straight or Helical Carbon Nanotubes for CJP 3D Printing Technology
7. CURRENT STATE OF RESEARCH IN THE FIELD OF HIGH-ENTROPY ALLOYS’ PRODUCTION IN GLOBAL PRACTICE
8. Current Status and Prospects for the Use of Nanosystems as Protective Coatings: A Review
9. CURRENT TRENDS IN THE PRODUCTION OF FERROUS AND NON-FERROUS ALLOYS’ CASTINGS USING EXTERNAL AND INTERNAL INFLUENCES
10. Current Trends to Obtain Metals and Alloys with Ultrafine-Grained Structure
11. Development of New Composite Materials Based on ‘Metal– Non-Metal’ with Improved Functional Properties
12. Effect of Controlled Rolling on the Structural and Phase Transformations
13. Electric Arc Methods to Synthesize Carbon Nanostructures
14. Electric Conductive Composites Based on Metal Oxides and Carbon Nanostructures
15. Energy and power parameters of rolling profiles for wheel rims of reduced metal intensity with toroidal flanges
16. Evaluation of the Stress–Strain State of the Wire during the Developed Thermomechanical Processing
17. Evolution of Copper Microstructure Subjected to Combined Twisting and Drawing Technology
18. EVOLUTION OF MICROSTRUCTURE OF COPPER AND ITS ALLOYS DURING SEVERE PLASTIC DEFORMATION PROCESS
19. EVOLUTION OF THE MICROSTRUCTURE OF STEEL IN THE PROCESSES OF SEVERE PLASTIC DEFORMATION
20. Experimental study ofenergy-powerparameters of billet rolling of compressor blades of aircraft engines
21. Features of Electrochemical (Anode) Synthesis of Nickel and Copper Nanocrystalline Powder
22. GRAIN GROWTH DURING ANNEALING OF ULTRAFINE-GRAINED AND NANOMATERIALS
23. High-Entropy ZrTiCrNiCu Coating
24. HYDROGEN IN COMPOUNDS AND ALLOYS WITH A15 STRUCTURE
25. INFLUENCE OF SELECTIVE LASER MELTING PROCESS PARAMETERS ON THE MICROSTRUCTURE FORMATION
26. Investigation of Properties’ Change of Copper Wire in the Process of Twisting and Subsequent Drawing
27. Investigation of the Dynamics of Electrochemical Dissolution of n-InP(111) in Various Electrolyte Compositions and Determination of Optimal Etching Conditions
28. Investigations on the Microstructure Evolution of Submicrocrystalline Metals Obtained by the Severe Plastic Deformation Method: A Review
29. Iron in Endometallofullerenes
30. LAYERED METAL COMPOSITES AS A PROMISING CLASS OF MODERN MATERIALS
31. LOCALIZATION OF DEFORMATION IN THE PROCESS OF LARGE PLASTIC DEFORMATIONS
32. MARTENSITIC TRANSFORMATIONS IN STAINLESS STEELS
33. Mechanisms of structure formation under severe plastic deformation: A review
34. METHODS FOR IMPROVING THE QUALITY OF FORGINGS AND BLANKS OBTAINED BY FORGING THROUGH INTENSIFYING SHEAR OR ALTERNATING STRAIN IN THE BULK OF DEFORMABLE METAL
35. METHODS FOR OBTAINING A GRADIENT STRUCTURE
36. Microstructure Evolution of a Steel Bar during FEM Simulation of Radial-Shear Broaching and Subsequent Drawing
37. MODERN FILLERS OF METAL AND POLYMER MATRICES
38. On the issue of alloying and modification of alloys: Using the waste products for creation of novel materials
39. ON THE SOLUBILITY OF HYDROGEN IN METALS AND ALLOYS
40. ORDERING ALLOYS WITH MICRO- AND NANOSCALE STRUCTURES BASED ON CUBIC LATTICES: MECHANICAL AND THERMODYNAMIC PROPERTIES
41. Paraelectric–Ferroelectric Phase Transformations in Nanodispersed Powders of KDP Crystals
42. Photosensitive Schottky Graphite/n-Si Diodes Fabricated by Electron Beam Evaporation
43. Physicochemical Processes of Electroarc Synthesis of Carbon Nanomaterials
44. Plasmochemical Synthesis of Platinum-Containing Carbon Nanostructures Suitable for CJP 3D-Printing
45. PROGRESS IN ADDITIVE MANUFACTURING
46. PROGRESS IN ROLLING MILL TECHNOLOGIES
47. PROSPECTS OF APPLICATION AND GLOBAL SIGNIFICANCE OF GRAPHENE
48. STATE-OF-THE-ART AND ANALYSIS OF CHARACTERISTICS, PROPERTIES, SIGNIFICANCE, AND APPLICATION PROSPECTS OF METALLURGICAL SLAGS
49. STRENGTHENING OF COPPER DURING HIGH-SPEED DEFORMATION
50. Stress state of 6063 cold-formed aluminium alloy workpieces in a closed die
1 2