Energy and power parameters of rolling profiles for wheel rims of reduced metal intensity with toroidal flanges
Chigirinsky V.V. Volokitina I.E.
April 2024G.V. Kurdyumov Institute for Metal Physics of N.A.S. of Ukraine
Metallofizika i Noveishie Tekhnologii
2024#46Issue 4343 - 354 pp.
The article contains experimental evaluation of technological possibilities of the wave-shaped profiles and confirmation of classical metal flow on profiles of wheel rims with toroidal flanges. The following parameters are recorded during the experiments: Temperature in the finishing gauge, rolling force in the 2nd, 4th, 6th and 7th passes, current, voltages and motor speeds. The analysis of experimental data of rolling profiles 7.0-20-03, 8.5-20-03 and 228G-020-01 shows that technological capabilities of special rolled products for the truck wheel rims with wavy central part are much higher than serial profiles, where the central zone is of rectangular shape. It is possible to reduce the mass of profiles without changing the process parameters, i.e., rolling force and torque. This indicates the influence of additional and kinematic effects on the deformation zone in real production conditions.
Energy and power parameters , Metal intensity , Rolling , Wheel rims , Workpiece
Text of the article Перейти на текст статьи
Rudny Industrial Institute, 38, 50 Let Oktyabrya Str, Rudny, KZ-111500, Kazakhstan
Karaganda Industrial University, 30 Republic Ave., Temirtau,, KZ-101400, Kazakhstan
Rudny Industrial Institute
Karaganda Industrial University
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026