Karaganda Industrial University 1

1. LARGE-SCALE LABORATORY TESTS FOR SMELTING MEDIUM-CARBON FERROMANGANESE USING JEZDA MANGANESE ORE AND SiMn17 SILICOMANGANESE FINES
2. THERMODYNAMICS OF INTEGRATED DEOXIDATION OF STEEL WITH A NEW ALLOY OF ALUMINUM-SILICUM-MANGANESE (Al-Si-Mn)
3. Investigations on the Microstructure Evolution of Submicrocrystalline Metals Obtained by the Severe Plastic Deformation Method: A Review
4. Investigation of the shape rolling process implementing intense shear strains in special diamond passes
5. MICROMECHANICAL PROPERTIES OF CRYO-ROLLED (CR) ALUMINUM ALLOY Al0,6Mg0,35Si
6. APPLICATION OF SPARK PLASMA SINTERING AS A METHOD FOR PRODUCING NEW CERAMIC MATERIALS FROM SILICON PRODUCTION WASTE
7. Development of New Composite Materials Based on ‘Metal– Non-Metal’ with Improved Functional Properties
8. On the issue of alloying and modification of alloys: Using the waste products for creation of novel materials
9. STATE-OF-THE-ART AND ANALYSIS OF CHARACTERISTICS, PROPERTIES, SIGNIFICANCE, AND APPLICATION PROSPECTS OF METALLURGICAL SLAGS
10. Universal technique for information and digital analysis of steel and alloy structures using MATLAB
11. The Mechanism of Orientation of Ferro-abrasive Grains in the Working Gap During Magnetic Abrasive Treatment
12. Forecasting Energy Consumption of a Mining Plant Using Artificial Neural Networks
13. THE EFFECT OF ELECTRIC CHARGE ACCUMULATION IN A ZRO₂-BASED NANOPOWDER SYSTEM
14. A Comparison of TiC Wetting Angles with Low Carbon Steel by Contact and Noncontact Methods
15. Synthesis and Study of the Sorption Properties of Calcium Silicate Obtained from Rice Husks
16. Experience in applying radial-shear rolling to improve the structure and properties of ferrous and non-ferrous metals and alloys
17. Using the radial shear rolling method for deep development of the cast structure of ingots of special materials
18. DETERMINATION OF THE STRESS STATE AND THE FORCE OF DEFORMATION OF BALL-SHAPED BILLETS IN A CLOSED MATRIX
19. Research of the Mechanism of Hardening of Liquid Metal in a Crystallizer During Casting and Extrusion Machine
20. Stress state of 6063 cold-formed aluminium alloy workpieces in a closed die
21. STRESS-STRAIN STATE DURING DRAFT OF WIDE BANDS WITH SHEAR
22. Study of the deformation state during the pulling of the workpiece in a special die
23. THERMODYNAMIC-DIAGRAM ANALYSIS OF THE Fe-Si-Al-Mn SYSTEM WITH THE CONSTRUCTION OF DIAGRAMS OF PHASE RELATIONS
24. Effect of mechanical activation of natural filler on the properties of elastomeric composites
25. EFFECT OF THE LIMITING DEFORMATION ZONE UNDER CONDITIONS OF ASYMMETRIC LOADING DURING ROLLING OF MEDIUM THICKNESS STRIPS
26. Energy and power parameters of rolling profiles for wheel rims of reduced metal intensity with toroidal flanges
27. ENERGY AND POWER PARAMETERS OF ROLLING PROFILES FOR WHEEL RIMS WITH REDUCED METAL INTENSITY AND TAPERED SEATS
28. Use of si-composite aspiration dusts production in the creation of thin-film anodes
29. Current Status and Prospects for the Use of Nanosystems as Protective Coatings: A Review
30. PROSPECTS OF APPLICATION AND GLOBAL SIGNIFICANCE OF GRAPHENE
31. Electric drive excitation control for improved performance of hot rolling mill finishing groups
32. Electric drive excitation control for improved performance of hot rolling mill finishing groups
33. Improvement of human–machine interface of complex technical systems using fractional-order PI^λD^μ controllers
34. CONCEPTS ANALYSIS OF ASYMMETRY FACTOR IMPLEMENTATION DURING ROLLING IN RELIEF ROLLS
35. Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review
36. INVESTIGATION OF FORCE PARAMETERS DURING ROLLING IN RELIEF ROLLS
37. EFFICIENCY OF USING EXPANdING SILTING PULP FOR ISOLATING FIRES IN MINES OF THE REPUBLIC OF KAZAKHSTAN
38. Industrial safety management at mining enterprises in Kazakhstan
39. NATURAL GAS-FUELLED WALKING BEAM FURNACE: PROSPECTS FOR APPLICATION IN THE METALLURGICAL INDUSTRY OF KAZAKHSTAN
40. DEVELOPMENT OF THE UNIVERSAL WORKING EQUIPMENT OF THE EXCAVATOR FOR PREPARATION OF MATERIALS BASED ON WASTE DURING THE ROAD BUILDING
41. Correction to: Distribution of Iron and Boron Between Silicon Metal Smelting Products in Industrial Saf using Borate Fluxes (Silicon, (2024), 16, 7, (3085-3092), 10.1007/s12633-024-02895-z)
42. Distribution of Iron and Boron Between Silicon Metal Smelting Products in Industrial Saf using Borate Fluxes
43. Study of Temperature Distribution in the Tool Blank Contact at Different Thermal Friction Milling Methods
44. Methods of synthesizing glycoluril-based macrocyclic compounds as precursors for polymeric compounds
45. THE POSSIBILITY OF INVOLVEMENT IN FERROALLOY CONVERSION OF NICKEL ORES OF KAZAKHSTAN
46. THEORETICAL AND EXPERIMENTAL MODELING OF THE PROCESS OF MELTING COMPLEX ALLOYED STEELS (Fe-Si-Al-Mn)
47. Effect of Plane Deformation on Superconducting and structural Properties of YBa₂Cu_3–yFe_yO_7–x Ceramics
48. Influence of the Increase in Temperature on Electrical Resistance of YBCO
49. Experimental Study and Computer Modelling of Thermal Friction Treatment Process of the HARDOX 450 Steel
50. EXPERIMENTAL STUDYING THE BELT CONVEYOR ROLLER WEAR DEPENDENCE ON THE INTENSITY OF TECHNOLOGICAL DUST ACCUMULATION IN OPEN PIT MINING
1 2 3 4