Публикация научной статьи в Скопус Scopus 369
18401. Investigation of the rock mass state in the near-wall part of the quarry and its stability management
18402. INVESTIGATION OF THE ROTARY SYSTEM FOR REMOVING CHAMBERS
18403. Investigation of the sanitary state of air and refrigeration equipment of meat processing enterprises in Kazakhstan using the method of metagenomic analysis
18404. Investigation of the sensitivity of human A549 cells to paclitaxel and sesquiterpene lactone alantolactone via apoptosis induction
18405. Investigation of the shape rolling process implementing intense shear strains in special diamond passes
18406. Investigation of the solid oxidizer effect on the metal geotechnology efficiency
18407. Investigation of the strength parameters of drilling pumps during the formation of contact stresses in gears
18408. INVESTIGATION OF THE STRESS STATE OF MINE WORKINGS USING METHODS OF DEFORMABLE SOLID MECHANICS
18409. INVESTIGATION OF THE STRESS STATE OF MINE WORKINGS USING METHODS OF DEFORMARLE SOLID MECHANICS
18410. INVESTIGATION OF THE STRESS-STRAIN STATE DURING NEW COMBINED DEFORMATION TECHNOLOGY
18411. INVESTIGATION OF THE STRESS-STRAIN STATE OF COMPONENTS OF A HYDRAULIC IMPACT DEVICE
18412. Investigation of the stress-strain state of domical masonry vaults
18413. Investigation of the structural, electronic, magnetic, and mechanical characteristics of double half-Heusler alloys V2Ni2Z ′ Z ′ ′ (Z ′ = Al, Ga and Z ′ ′ = Sb, Sn) using ab initio computational methods
18414. Investigation of the structural, mechanical and tribological properties of plasma electrolytic hardened chromium-nickel steel
18415. Investigation of the Structure and Mechanical Properties of Steel Intended for Protective Structures
18416. Investigation of the synthesis of a grinding intensifier from secondary raw materials and its influence on the microstructural development of cement stone
18417. INVESTIGATION OF THE TECHNOLOGY FOR OBTAINING THIN COATINGS OF VANADIUM PENTOXIDE FOR THE PRODUCTION OF SMART WINDOWS
18418. Investigation of the Technology of Introducing Li, Mg and Zr Alloys into Aluminum Alloy
18419. Investigation of the temperature and precursors concentration dependence of the formation of ZnSe quantum dots
18420. Investigation of the thermophysical characteristics of minerals at various heating parameters
18421. Investigation of the use of variable pressure in the formation of sand-resin casting moulds
18422. Investigation of the visible light photocatalytic antibacterial properties of Cu2O/UiO-66/Bi2MoO6 composites with double Z-type heterojunction
18423. INVESTIGATION OF THE WELDED LAYER HARDNESS AT RESTORATION OF ELECTRIC MOTOR SHAFTS
18424. Investigation of Thermal and Electrical Properties of Composite Cathode Materials Pr1–xSrxFe1–yCoyO3 (x = 0.3, 0.4; y = 0.2): GDC and La2Ni1-xCoxO4+δ (x = 0.2): GDC for SOFC
18425. Investigation of thermal effects of radiofrequency ablation mediated with iron oxide nanoparticles dispersed in agarose and chitosan solvents
18426. Investigation of thermal properties of carbon–containing composites obtained by solid-state combustion
18427. Investigation of thermal, electrical, and electrochemical properties of Pr1−xSrxFe1−yCoyO3 (0 < x < 0.4; y = 0.2, 0.5) cathode materials for SOFC
18428. Investigation of thermodynamic and kinetic regularities of asbestos waste leaching processes
18429. Investigation of transient heat transfer in multi-scale PCM composites using a semi-analytical model
18430. Investigation of transient processes of tritium release from biphasic lithium ceramics Li4SiO4-Li2TiO3 at negative neutron flux pulse
18431. Investigation of tritium and helium generation and release from tin-lithium alloy under neutron irradiation
18432. INVESTIGATION OF ULTRASONIC INFLUENCE ON THE KINETICS OF EXTRACTING GOLD FROM ELECTRONIC WASTE
18433. Investigation of V2O5 and CeO2 Nanoparticles: Synthesis, Characterization, and Application in Ammonium Removal from Aqueous Solutions
18434. Investigation of vacuum cryodeposited water films capturing carbon monoxide on an optical surface
18435. INVESTIGATION OF VARIOUS MECHANISMS OF RADIATIVE RECOMBINATION OF SILICON NITRIDE AS AN EFFECTIVE WAY TO BROADENING THE PHOTOLUMINESCENCE SPECTRUM
18436. Investigation of various process attributes in an ingotless rolling-extrusion process imposed on waste aluminum alloy rods
18437. Investigation of Vermicompost Influence on Seed Germination of the Endangered Wild Rubber Species Scorzonera tau-saghyz
18438. Investigation of Waste-Based Self-Compacting Concrete: Analysis of Rheology and Hydration with Silica Fume and Fly Ash
18439. Investigation of water freezing with inclusion of nanoparticle within a container with fins
18440. INVESTIGATION OF WEAR OF CUTTING PART OF POLYGONAL KNIFE CAR GRADERS IN DIFFERENT GROUND CONDITIONS
18441. Investigation of zinc leaching from clinker with pretreatment of raw materials by ultrahigh frequency radiation (microwave)
18442. Investigation on Competing Fission Modes in 178Pt* Produced by 36Ar + 142Nd Reaction up to High Excitation Energies
18443. Investigation on graphene addition on the quasi-static and dynamic responses of carbon fibre-reinforced metal laminates
18444. Investigation on optical and electrical properties of multilayer ITO/AZO/ITO transparent conductive oxides
18445. Investigation on the effect of technological parameters of electrolyte-plasma cementation method on phase structure and mechanical properties of structural steel 20X
18446. Investigation on the mechanical performance of mono-material vs multi-material interface geometries using fused filament fabrication
18447. Investigation the structure and properties of deformed semi-finished products produced from chips of Al–Mg alloys system alloyed with scandium
18448. Investigations for hydrogen storage applications of XPtH3 (X = Cs, Fr) hydrides: A first principles study
18449. Investigations of Activated Carbon from Different Natural Sources for Preparation of Binder-Free Few-Walled CNTs/Activated Carbon Electrodes
18450. Investigations of extraction of copper and crud formation components of productive solution of Almaly deposit
1 367 368 369 370 371 725