INVESTIGATION OF THE WELDED LAYER HARDNESS AT RESTORATION OF ELECTRIC MOTOR SHAFTS
Zharkevich O. Nurzhanova O. Mukhitova A. Teliman I. Naboko Y. Stukach O. Moyses B.
16 June 2025Institute for research and design in industry
Journal of Applied Engineering Science
2025#23Issue 2322 - 329 pp.
The article is devoted to studying the influence of wire feed rate on the hardness of the welded layer during the restoration of electric motor shafts. The authors analyse the importance of optimal hardness to ensure the durability and reliability of the reconditioned parts. The paper considers various factors affecting the hardness of the welded layer, such as type of welding wire (AWS A5.18 ER70S-6, OK Tubrodur 35 G M, AWS A5.28 ER80S-G); cladding modes (feed rate, current, voltage); properties of the welded clad metal (fusion with the base, tendency to crack formation). Based on the conducted experiments, the optimal welding modes for each of the studied wires and the corresponding hardness values were determined. The obtained results allow us to conclude that the wire feed rate is one of the key parameters affecting the hardness of the welded layer.
current , hardfacing , hardness , voltage , wire feed rate
Text of the article Перейти на текст статьи
Abylkas Saginov Karaganda Technical University, Faculty of Mechanical Engineering, Department of Technological Equipment, Mechanical Engineering and Standardization, Karaganda, Kazakhstan
Abylkas Saginov Karaganda Technical University, Faculty of Mechanical Engineering, Department of Nanotechnology and Metallurgy, Karaganda, Kazakhstan
National Research University Higher School of Economics, Faculty of Electronic Engineering, Department of Electronic Engineering, Moscow, Russian Federation
Tomsk Polytechnic University, Faculty of Control Systems and Robotics, Department of Control and Diagnostics, Tomsk, Russian Federation
Abylkas Saginov Karaganda Technical University
Abylkas Saginov Karaganda Technical University
National Research University Higher School of Economics
Tomsk Polytechnic University
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026