Rudny Industrial Institute 2
51. Dependence of the Grain Size in the Microstructure of Copper on the Rate of Deformation by “Helical Rolling–Pressing”
52. EFFECT OF SURFACE MODIFICATION OF 5KHV2S STEEL ON THE MECHANISM AND INTENSITY OF CONTACT WEAR
53. Influence of Equal-Channel Angular Pressing on Changes in the Microstructure of Steel Grade 1055
54. INVESTIGATION OF A NEW FORGING TECHNOLOGY IMPLEMENTING SHEAR DEFORMATION
55. INVESTIGATION OF THE EFFECT OF COMBINED THERMOMECHANICAL PROCESSING ON THE BRASS MICROSTRUCTURE EVOLUTION AND THE MICROHARDNESS CHANGE
56. Microstructure evolution and mechanical properties of titanium nickelide during pressing in equal-channel angular matrix with quasi-small angle of channels intersection
57. ROLE OF PRE-HEAT TREATMENT IN THE FORMATION OF A FAVORABLE FINEGRAINED STRUCTURE IN COPPER AND BRASS FOR FURTHER DEFORMATION
58. Use of laser cladding for the synthesis of coatings from high-entropy alloys reinforced with ceramic particles
59. The Effect of Radial-Shear Rolling Deformation Processing on the Structure and Properties of Zr-2.5Nb Alloy
60. FEM Simulation of Rolling-Pressing Process with Horizontal and Vertical Rolls
61. Finite Element Modeling of ECAP-Linex Combined Process of Severe Plastic Deformation
62. Investigation of the Efficiency of Roll Profiles and Technological Schemes of Deformation of Asymmetric Rolling in Relief Rolls of C11000 Copper Alloy by FEM Simulation
63. MODELLING THE EVOLUTION OF CASTING DEFECT CLOSURE BY RADIAL SHEAR ROLLING
64. Analysis of properties and deformation flow during production of thin-walled spherical parts from aluminum alloy 1580
65. Investigation of various process attributes in an ingotless rolling-extrusion process imposed on waste aluminum alloy rods
66. Investigation the structure and properties of deformed semi-finished products produced from chips of Al–Mg alloys system alloyed with scandium
67. Mechanical properties and failure criterion analysis of Pt-Rh alloy sheets for technical purposes
68. Modeling and investigation of ingotless rolling-extrusion process of rods from Al-Zr-Fe and Al–Mg-Sc alloys
69. Modeling and study of the technology for obtaining solder wire from new silver-based alloys without cadmium
70. Plastic deformation and properties of new Pd-Ag(Au)-Rh alloys for jewelry and technical purposes
71. Mechanism and patterns of wear of chrome steels with a surface-modified layer
72. ON THE ISSUE OF IMPROVING THE STRUCTURE OF TOOL STEELS
73. WEAR OF 16MnCrS5 STEEL SURFACE LAYERS IN THE PULSING CONTACT LOADS
74. DESIGN IMPROVEMENT OF THE STEP-WEDGE DIES AND EXPERIMENTAL STUDY OF THE FORGING PROCESS OF 45 STEEL BILLETS
75. ‘Smart city’ concept in digital economics: practice of Russia and Kazakhstan
76. USE OF NEW SOLID CARBON-CONTAINING REDUCING AGENT IN THE PRODUCTION OF TECHNICAL SILICON
77. Visualization to Enhance School Students’ Mental Activity
78. ANALYSIS OF THE TECHNOLOGICAL PROCESS OF FORGING WORKPIECES IN STEP-WEDGE STRIKERS USING FEM MODELING
79. CHANGES IN MICROSTRUCTURE AND PROPERTIES OF AUSTENITIC STEEL AISI 316 DURING HIGH-PRESSURE TORSION
80. CHANGES IN THE PROPERTIES OF Fe37-3FN STEEL DURING ECAP-DRAWING
81. COMPUTER MODELING AND INVESTIGATION OF THE DEFORMATION PROCESS IN CONVEX-CONCAVE AND TRAPEZOIDAL STRIKERS
82. FATIGUE PROPERTIES AND TRIBOLOGICAL TESTS OF AISI 316 STEEL AFTER HIGH PRESSURE TORSION
83. Finite element method (Fem) simulation of processing of aisi-316 austenitic stainless steel by high-pressure torsion (hpt) process at the cryogenic cooling
84. Martensitic Transformation in AISI-316 Austenitic Steel During Thermomechanical Processing
85. Obtaining long products by severe plastic deformation methods: A Review
86. Strain state and microstructure evolution of aisi-316 austenitic stainless steel during high-pressure torsion (Hpt) process in the new stamp design
87. Thermomechanical Treatment of Stainless Steel Piston Rings
88. Thermomechanical treatment of steel using severe plastic deformation and cryogenic cooling
89. Changes in Microstructure and Mechanical Properties of Steel-Copper Wire During Deformation
90. Deformation of Copper by High-Pressure Torsion
91. DEVELOPMENT OF RECOMMENDATIONS FOR THE IMPLEMENTATION OF COMBINED DEFORMATION TREATMENT “ECAP-DRAWING” INTO PRODUCTION
92. Effect of Controlled Rolling on the Structural and Phase Transformations
93. Effect of Deformation by High-Pressure Torsion in a Combined Matrix on the Properties of Brass
94. Effect of Ecap-Drawing on the Microstructure of a Bimetallic Wire
95. EFFECT OF HIGH-PRESSURE TORSION ON MICROSTRUCTURE CHANGES IN MICROALLOYED STEEL
96. EFFECT OF ULTRASONIC PROCESSING ON THE PROPERTIES OF ULTRAFINEGRAINED BRASS
97. Evolution of Microstructure and Mechanical Properties of Steel Under a Combined “Helical Rolling – Pressing” Process
98. FEM-STUDY OF BIMETALLIC WIRE DEFORMATION DURING COMBINED ECAP-DRAWING
99. MARTENSITIC TRANSFORMATIONS IN STAINLESS STEELS
100. METHODS FOR IMPROVING THE QUALITY OF FORGINGS AND BLANKS OBTAINED BY FORGING THROUGH INTENSIFYING SHEAR OR ALTERNATING STRAIN IN THE BULK OF DEFORMABLE METAL
1 2 3