Department Of Mechanics 2

51. Enhancement of the output power of a small horizontal axis wind turbine based on the optimization approach
52. Mathematical Modeling and Experimental Investigation of the Dynamic Response for an Annular Circular Plate Made of Glass/Polyester Composite Under Different Boundary Conditions
53. Study of heat transfer through functionally graded material fins using analytical and numerical investigations
54. SYSTEMATIC DEVELOPMENT OF AN AUTONOMOUS ROBOTIC CAR FOR FIRE-FIGHTING BASED ON THE INTERACTIVE DESIGN APPROACH
55. Accelerated Creep of Asphalt Concrete at Medium Temperatures
56. Models for Predicting the Long-Term Strength of Rheonomic Materials
57. Modeling the dynamics of a gyroscopic rigid rotor with linear and nonlinear damping and nonlinear stiffness of the elastic support
58. An Experimental Investigation and Numerical Analysis of the Thermal Behavior of a Clutch System Using the Frictional Facing of Functionally Graded Materials
59. Finite element analysis of the thermal and thermo-mechanical coupling problems in the dry friction clutches using functionally graded material
60. Operational Analysis of Environmental Implications of Friction Materials Based on the Taguchi Approach
61. A Novel Optimization Strategy of Bearing Geometry with a Length to Diameter Ratio of 1.25 under Severe Operating Conditions Using Taguchi Method
62. An Investigation on the Teeth Crowning Effects on the Transient EHL Performance of Large-Scale Wind Turbine Spur Gears
63. Analysis of the Performance of Chamfered Finite-Length Journal Bearings under Dynamic Loads
64. Frictional power loss in journal bearing considering parabolic shape for the bearing edges under misalignment
65. Minimizing Misalignment Effects in Finite Length Journal Bearings
66. On the Use of Taguchi Method in the Analysis of the Dynamic Response of Variable Bearing Design under Impact Load
67. Enhancement of the corrosion resistance for stainless steel 316 by applying laser shock peening
68. Preparation and Characterization of Vanadium Pentoxide and Nickel Oxide Nanoparticles and Their Use in Removing Tetracycline from Water
69. THE USE OF TECHNOLOGIES FOR STABILIZING THE ELECTROPHYSICAL CHARACTERISTICS OF SENSOR STRUCTURES USED IN THE DEVELOPMENT AND MANUFACTURE OF MEASURING TRANSDUCERS
70. CREATION OF AN INNOVATIVE ROBOT WITH A GRIPPER FOR MOVING PLANT MICROSHOOTS FROM THE IN VITRO TRANSPORT TANK TO THE WORKING TANK WITH SOIL GROUND AT THE STAGE OF THEIR ADAPTATION IN SOIL GROUND DURING MICROCLONAL REPRODUCTION
71. CREATION OF AN INNOVATIVE ROBOT WITH A GRIPPER FOR MOVING PLANT MICROSHOOTS FROM THE IN VITRO TRANSPORT TANK TO THE WORKING TANK WITH SOIL GROUND AT THE STAGE OF THEIR ADAPTATION IN SOIL GROUND DURING MICROCLONAL REPRODUCTION
72. DEVELOPMENT OF INTELLIGENT AND EXPERT SYSTEM FOR AUTOMATION OF PROCESSES OF MINING AND TRANSPORT WORKS ON THE BASIS OF SATELLITE NAVIGATION
73. JUSTIFICATION OF AN INNOVATIVE SYSTEM FOR THE COMPLETE BURIAL OF SOLID, HIGH-LEVEL RADIOACTIVE WASTE (HLW) IN SPENT OPENPIT MINES
74. JUSTIFICATION OF AN INNOVATIVE SYSTEM FOR THE COMPLETE BURIAL OF SOLID, HIGH-LEVEL RADIOACTIVE WASTE (HLW) IN SPENT OPENPIT MINES
75. JUSTIFICATION OF A DUAL VENTILATION SYSTEM FOR THE COMPLETE BURIAL OF HIGH-LEVEL RADIOACTIVE WASTE IN SPENT OPEN MINES
76. JUSTIFICATION OF A DUAL VENTILATION SYSTEM FOR THE COMPLETE BURIAL OF HIGH-LEVEL RADIOACTIVE WASTE IN SPENT OPEN MINES
77. JUSTIFICATION OF THE INNOVATIVE DESIGN OF THE SKIP WINCH WITH A BODY MOVED BY A COUNTERWEIGHT GRAVITY DRIVE
78. Relative Dynamics and Control of Satellite Formation Flying Representing the Synthetic Aperture Telescope on Geostationary Orbit
79. A Review of Advancements and Applications of Satellite-Derived Bathymetry
80. Numerical Simulation Study of Thermal Performance in Hot Water Storage Tanks with External and Internal Heat Exchangers
81. INTERACTIVE DESIGN APPROACH FOR CLEAN TECHNOLOGIES: COMPREHENSIVE PARAMETER COMPUTATION OF SOLAR MODULES
82. Influence of constant and alternating electric fields on the deformation and destruction of a liquid droplet
83. Acceleration of Numerical Modeling of Uranium In Situ Leaching: Application of IDW Interpolation and Neural Networks for Solving the Hydraulic Head Equation
84. Comparative Evaluation of Flow Rate Distribution Methods for Uranium In-Situ Leaching via Reactive Transport Modeling
85. Computational Approaches to Assess Flow Rate Efficiency During In Situ Recovery of Uranium: From Reactive Transport to Streamline- and Trajectory-Based Methods
86. Reactive Transport Modeling during Uranium In Situ Leaching (ISL): The Effects of Ore Composition on Mining Recovery
87. Streamline-based reactive transport modeling of uranium mining during in-situ leaching: Advantages and drawbacks
88. Investigation of Nonlinear Forced Vibrations of the “Rotor-Movable Foundation” System on Rolling Bearings by the Jacobi Elliptic Functions Method
89. Parametric Analysis of Nonlinear Oscillations of the “Rotor–Weakly Conductive Viscous Fluid–Foundation” System under the Action of a Magnetic Field
90. EXACT SOLUTIONS OF EQUATIONS OF THE TWO-PRIMARY-BODY PROBLEM IN THE RESTRICTED THREE-BODY PROBLEM WITH VARIABLE MASSES
91. Effect of Nanoparticles Flow to Improve the Oil Refineries Wastewater
92. Microstructural and Mechanical Characterization of Ledeburitic AISI D2 Cold-Work Tool Steel in Semisolid Zones via Direct Partial Remelting Process
93. Compression heat pump-assisted thermal desalination systems: a comprehensive review
94. Renewable Energy Systems for Sustainable Environment
95. Renewable Energy Systems for Sustainable Environment
96. Compensation Manipulator for Concrete 3D Printing Based on the CONPrint3D
97. Grasping Stability of a Robotic Gripper with Frictional Self-Locking Mechanism
98. Analysis of heat and mass transfer on the peristaltic flow in a duct with sinusoidal walls: Exact solutions of coupled PDEs
99. NUMERICAL STUDY ON ENHANCING THERMAL REGULATION OF PV/T SOLAR SYSTEMS USING ECO-FRIENDLY NANOFLUID COOLING FOR SUSTAINABLE ENERGY APPLICATIONS
100. The circular economy approach to evaluating end-of-life cost alternatives of solar PV panels: The case of Burnoye-1, Kazakhstan
1 2 3