Plasmascience Llp 1

1. Microstructure and Dry-Sliding Tribology of Thermal-Spray Coatings on Cu for Continuous Casting Molds
2. The Influence of Wire Type on the Properties and Characteristics of Coatings Obtained by the Arc Metallization Method
3. Effect of ultrasonic nanocrystalline surface modification on hardness and elastic modulus of Ti-6Al-4V alloy
4. Influence of Layer Configuration on the Mechanical, Tribological and Corrosion Performance of Ti/TiN Multilayer Coatings
5. Investigation of Changes in the Structural-Phase State and the Efficiency of Hardening of 30CrMnSiA Steel by the Method of Electrolytic Plasma Thermocyclic Surface Treatment
6. Production of Anhydrite Binder from Waste Fluorangydrite
7. Influence of Pulse-Plasma Treatment Distance on Structure and Properties of Cr₃C₂-NiCr-Based Detonation Coatings
8. Structural and Phase Transformations in Detonation Coatings Made of Eutectic Fe–TiB₂–CrB₂ Alloy After Pulsed Plasma Exposure
9. Detonation Spraying of Functionally Graded Hydroxyapatite/Titanium Coatings on Ti–6Al–4V Alloy
10. Development of biocompatible coatings for orthopedic joint implants
11. Effect of Helium Plasma Irradiation on Microstructures and Mechanical Properties of Tungsten
12. Formation of Titanium Oxynitride Films by Reactive Magnetron Sputtering, Their Structural Features and Properties
13. Improving the Efficiency of Air Plasma Spraying of Titanium Nitride Powder
14. Influence of Plasma Arc Current and Gas Flow on the Structural and Tribological Properties of TiN Coatings Obtained by Plasma Spraying
15. Synthesis and Formation Mechanism of Metal Oxide Compounds
16. A Study on Surface Hardening and Wear Resistance of AISI 52100 Steel by Ultrasonic Nanocrystal Surface Modification and Electrolytic Plasma Surface Modification Technologies
17. Preparation of Iron-Based Metallic Powders by the Electroplasma Method
18. Effect of Multilayer Cr/CrN Coatings Deposited by Magnetron Sputtering on the Thermal Stability and High-Temperature Steam Oxidation Resistance of Zirconium Alloy E110
19. Structural and Phase Characteristics and Properties of Multilayer Cr/CrN Coatings Obtained by Magnetron Sputtering
20. A Study of the Properties of Two-Layer Coatings Based on TiO₂-Cr₂O₃/Ta
21. Comparative study of structures and properties of detonation coatings with α-al₂o₃ and γ-al₂o₃ main phases
22. Comparative study of the structure and properties of homogeneous and gradient Ni-Cr-Al coatings
23. Comprehensive Study of Electrolytic Plasma Nitriding of Austenitic Stainless Steels
24. Creation of bioceramic coatings on the surface of ti–6al–4v alloy by plasma electrolytic oxidation followed by gas detonation spraying
25. DEPOSITION OF DUPLEX Cr₃ C₂-NiCr COATINGS ON STEEL USING A COMBINED TECHNIQUE OF GAS DETONATION SPRAYING AND PULSE-PLASMA TREATMENT
26. Effect of Electrolytic-Plasma Hardening on the Microstructure and Tribological Properties of Low-Alloy Steels
27. Effect of pulsed-plasma treatment on the structural-phase composition and tribological properties of detonation coatings based on Ti–Si–C
28. Effect of Technological Parameters of Detonation Spraying on the Properties of Cr₂O₃ Coatings
29. Effect of Voltage on Properties of 30HGSA Steel Coatings by Supersonic Arc Metallization Method
30. Effects of Ultrasonic Nanocrystal Surface Modification on the Formation of a Nitride Layer in Ti-6Al-4V Alloy
31. Electrolyte-plasma surface hardening of hollow steel applicator needles for point injection of liquid mineral fertilizers
32. Electrolytic-Plasma Nitriding of Austenitic Stainless Steels After Mechanical Surface Treatment
33. Environmental Benefits of Fluorogypsum Reuse in the Production of Construction Materials
34. Impact of electronic radiation on the morphology of the fine structure of the surface layer of R6M5 steel
35. Impact of gas pressure and spray distance on coating formation in electric arc metallization
36. Influence of gas mixture on the mechanical and physical properties of CrN coatings obtained by magnetron sputtering method
37. Influence of high-speed arc metallization wire feed rate on tribological and corrosion properties of 30HGSA steel coatings
38. Influence of irradiation doses on the mechanical and tribological properties of polyetheretherketone exposed to electron beam treatment
39. Influence of plasma electrolytic hardening modes on the structure and properties of 65G steel
40. Influence of Spraying Parameters on the Structure and Tribological Properties of Cr₃C₂-NiCr Detonation Coatings
41. Influence of Spraying Process Parameters on the Characteristics of Steel Coatings Produced by Arc Spraying Method
42. Influence of Varying the Spraying Distance on the Structural-Phase State and Mechanotribological Properties of 86WC-10Co-4Cr-Based Coatings Obtained by the HVOF Method
43. Investigation of Electrical Discharge Processes During Electrolytic–Plasma Nitrocarburizing
44. Investigation of High-Temperature Oxidation of Homogeneous and Gradient Ni-Cr-Al Coatings Obtained by Detonation Spraying
45. Investigation of the Influence of Powder Fraction on Tribological and Corrosion Characteristics of 86WC-10Co-4Cr Coating Obtained by HVOF Method
46. Investigation of the Influence of the Oxygen Flow Rate on the Mechanical, Structural and Operational Properties of 86WC-10Co-4Cr Coatings, as Determined Using the High-Velocity Oxyfuel Spraying Method
47. Linear Plasma Device for the Study of Plasma–Surface Interactions
48. Modification of coatings based on al₂o₃ with concentrated energy flows
49. Obtaining of Hydroxyapatite Coatings on A Titanium Substrate by Detonation-Gas Spraying
50. Optimization of Cold Gas Dynamic Spray Coatings Using Agglomerated Al–Zn–TiO₂ Powders on Steel
1 2