Production of Anhydrite Binder from Waste Fluorangydrite


Bayatanova L. Rakhadilov B. Kengesbekov A. Kylyshkanov M. Abdulina S. Adilkanova M. Sagdoldina Z.
April 2023MDPI

ChemEngineering
2023#7Issue 2

The technology for obtaining hydrofluoric acid and the peculiarities of its production were studied, and the physical and chemical properties of the waste were examined. Activators that accelerated the hardening of the anhydrite binder were selected. The process of recycling fluorine hydrite waste from the production of hydrofluoric acid at Ulba Metallurgical Plant JSC was studied, and anhydrite unburnt binder with a setting time of 30 min was obtained. On the basis of the obtained data, a technological scheme of anhydrite binder production was developed. The effectiveness of the technological scheme was confirmed experimentally. This work aimed to study the possibility of the integrated use of secondary and anthropogenic raw materials from Ulba Metallurgical Plant, which represents an important means of not only increasing production efficiency and economic benefits and reducing the irrational alienation of land resources, but also protecting against the pollution of water and air basins, as the environmental policy of UMP JSC is nowadays of great importance.

activation , activator , anhydrite , anhydrite binder , fluorine gypsum , hydrofluoric acid

Text of the article Перейти на текст статьи

Institute of Composite Materials, Ust-Kamenogorsk, 070000, Kazakhstan
PlasmaScience LLP, Ust-Kamenogorsk, 070000, Kazakhstan
Ulba Metallurgical Plant JSC, Ust-Kamenogorsk, 070000, Kazakhstan
The Faculty of Earth and Environmental Sciences, Daulet Serikbaev East Kazakhstan Technical University, Ust-Kamenogorsk, 070000, Kazakhstan
Research Center “Surface Engineering and Tribology”, Sarsen Amanzholov East Kazakhstan University, Ust-Kamenogorsk, 070000, Kazakhstan

Institute of Composite Materials
PlasmaScience LLP
Ulba Metallurgical Plant JSC
The Faculty of Earth and Environmental Sciences
Research Center “Surface Engineering and Tribology”

10 лет помогаем публиковать статьи Международный издатель

Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026