Research Center Surface Engineering And Tribology 1

1. Microstructure and Dry-Sliding Tribology of Thermal-Spray Coatings on Cu for Continuous Casting Molds
2. The Influence of Wire Type on the Properties and Characteristics of Coatings Obtained by the Arc Metallization Method
3. Titanium nitride nanoparticles as plasmonic alternatives to gold and silver: Enhancing luminescence and Judd-Ofelt parameters in Tm³⁺/Nd³⁺ doped oxyfluorotellurite glass
4. Investigation of Changes in the Structural-Phase State and the Efficiency of Hardening of 30CrMnSiA Steel by the Method of Electrolytic Plasma Thermocyclic Surface Treatment
5. Study of the Structural-Phase State of Hydroxyapatite Coatings Obtained by Detonation Spraying at Different O₂/C₂H₂ Ratios
6. Production of Anhydrite Binder from Waste Fluorangydrite
7. Development of Method for Applying Multilayer Gradient Thermal Protective Coatings Using Detonation Spraying
8. Investigation of Structural Phase, Mechanical, and Tribological Characteristics of Layer Gradient Heat-Protective Coatings Obtained by the Detonation Spraying Method
9. Study of the Tribological Properties of Self-Fluxing Nickel-Based Coatings Obtained by Gas-Flame Spraying
10. The Influence of Air Pressure in Electric Arc Spraying on the Properties of 30KhGSA/20Kh13 Bilayer Coatings
11. The Study of Tribological Characteristics of YSZ/NiCrAlY Coatings and Their Resistance to CMAS at High Temperatures
12. Influence of Pulse-Plasma Treatment Distance on Structure and Properties of Cr₃C₂-NiCr-Based Detonation Coatings
13. Microstructure and Mechanical Properties of Equiatomic CoCrFeNiMn High-Entropy Alloy Coatings Fabricated by High-Velocity Oxygen Fuel Spraying
14. Detonation Spraying of Functionally Graded Hydroxyapatite/Titanium Coatings on Ti–6Al–4V Alloy
15. Improving the Efficiency of Air Plasma Spraying of Titanium Nitride Powder
16. Synthesis and Formation Mechanism of Metal Oxide Compounds
17. The Influence of Powder Composition and Hydrogen Consumption on the Structural, Corrosion and Tribological Characteristics of Fe-Cr-Al Coatings Obtained by Air Plasma Spraying
18. Effects of Electron Beam Irradiation on Mechanical and Tribological Properties of PEEK
19. The Influence of Co–Cr, Ni and NiCr Binders on the Performance of WC Coatings Deposited by Detonation Spraying
20. A Study of the Properties of Two-Layer Coatings Based on TiO₂-Cr₂O₃/Ta
21. Activation of Fluorohydride by Various Chemical Additives for the Production of Construction Materials Based on It
22. Change of 0.34Cr-1Ni-Mo-Fe steel dislocation structure in plasma electrolyte hardening
23. Comparative study of structures and properties of detonation coatings with α-al₂o₃ and γ-al₂o₃ main phases
24. Effect of pulsed-plasma treatment on the structural-phase composition and tribological properties of detonation coatings based on Ti–Si–C
25. Environmental Benefits of Fluorogypsum Reuse in the Production of Construction Materials
26. Impact of electronic radiation on the morphology of the fine structure of the surface layer of R6M5 steel
27. Influence of gas mixture on the mechanical and physical properties of CrN coatings obtained by magnetron sputtering method
28. Influence of Varying the Spraying Distance on the Structural-Phase State and Mechanotribological Properties of 86WC-10Co-4Cr-Based Coatings Obtained by the HVOF Method
29. Investigation of Electrical Discharge Processes During Electrolytic–Plasma Nitrocarburizing
30. Investigation of High-Temperature Oxidation of Homogeneous and Gradient Ni-Cr-Al Coatings Obtained by Detonation Spraying
31. Investigation of the Influence of Powder Fraction on Tribological and Corrosion Characteristics of 86WC-10Co-4Cr Coating Obtained by HVOF Method
32. Investigation of the Influence of the Oxygen Flow Rate on the Mechanical, Structural and Operational Properties of 86WC-10Co-4Cr Coatings, as Determined Using the High-Velocity Oxyfuel Spraying Method
33. Investigation of the structural, mechanical and tribological properties of plasma electrolytic hardened chromium-nickel steel
34. Investigation on the effect of technological parameters of electrolyte-plasma cementation method on phase structure and mechanical properties of structural steel 20X
35. Linear Plasma Device for the Study of Plasma–Surface Interactions
36. Preparation and characterization of nicr/nicr-al₂o₃/al₂o₃ multilayer gradient coatings by gas detonation spraying
37. Selection of Optimal Process Parameters for Arc Metallization
38. Structural features and tribological properties of detonation gun sprayed ti–si–c coating
39. Structural Phase Transformations in Detonation Coatings Based on Ti₃SiC₂ after Pulse-Plasma Effect
40. Structure and tribological properties of Ni-Cr-Al-based gradient coating prepared by detonation spraying
41. The Influence of Distance Pulsed Plasma Treatment on the Structure and Properties of Detonation Coatings from Eutectic Alloy Fe-TiB₂-CrB₂
42. Comprehensive Study of the Mechanical and Tribological Properties of NiCr-Al Detonation Coatings
43. Effect of Electrofriction Treatment on Microstructure, Corrosion Resistance and Wear Resistance of Cladding Coatings
44. Effect of irradiation with Si⁺ ions on phase transformations in Ti–Al system during thermal annealing
45. Electrofrictional Hardening of the 40Kh and 65G Steels
46. Increasing Wear Resistance of Ploughshare by Electrofriction Treatment
47. Influence of Detonation Spraying Parameters on the Microstructure and Mechanical Properties of Hydroxyapatite Coatings
48. Magnesium Oxide Production by Plasma Chemical Conversion from Fluorine-Containing Industrial Waste
49. Microstructure, Hardness and Tribological Characteristics of High-Entropy Coating Obtained by Detonation Spraying
50. Modification of the Surface of 40 Kh Steel by Electrolytic Plasma Hardening
1 2