Rakhadilov B 1

1. Effect of Electron Beam on Physico-Chemical Properties of PA6 Polyamide
2. Mechano-Chemical Properties of Electron Beam Irradiated Polyetheretherketone
3. The Influence of Wire Type on the Properties and Characteristics of Coatings Obtained by the Arc Metallization Method
4. Effect of ultrasonic nanocrystalline surface modification on hardness and elastic modulus of Ti-6Al-4V alloy
5. Influence of Layer Configuration on the Mechanical, Tribological and Corrosion Performance of Ti/TiN Multilayer Coatings
6. Influence of Mechanical Activation on the Evolution of TiSiCN Powders for Reactive Plasma Spraying
7. Investigation of Changes in the Structural-Phase State and the Efficiency of Hardening of 30CrMnSiA Steel by the Method of Electrolytic Plasma Thermocyclic Surface Treatment
8. Fine structure of low-carbon steel after electrolytic plasma treatment
9. Production of Anhydrite Binder from Waste Fluorangydrite
10. Investigation of Structural Phase, Mechanical, and Tribological Characteristics of Layer Gradient Heat-Protective Coatings Obtained by the Detonation Spraying Method
11. Influence of Pulse-Plasma Treatment Distance on Structure and Properties of Cr₃C₂-NiCr-Based Detonation Coatings
12. Structural and Phase Transformations in Detonation Coatings Made of Eutectic Fe–TiB₂–CrB₂ Alloy After Pulsed Plasma Exposure
13. Influence of detonation-spraying parameters on the phase composition and tribological properties of Al₂O₃ coatings
14. Effect of Helium Plasma Irradiation on Microstructures and Mechanical Properties of Tungsten
15. Formation of Titanium Oxynitride Films by Reactive Magnetron Sputtering, Their Structural Features and Properties
16. Improving the Efficiency of Air Plasma Spraying of Titanium Nitride Powder
17. Research on the Structural–Phase and Physical–Mechanical Characteristics of the Cr₃C₂-NiCr Composite Coating Deposited by the HVOF Method on E110 Zirconium Alloy
18. Effects of Electron Beam Irradiation on Mechanical and Tribological Properties of PEEK
19. The Impact of Electrolytic Cell Parameters on the Boiling Rate of the Electrolyte During Electrolytic Plasma Processing
20. The Role of Current Density Distribution on Local Hardening of 20GL Steel During Electrolytic Plasma Processing
21. A Study on Surface Hardening and Wear Resistance of AISI 52100 Steel by Ultrasonic Nanocrystal Surface Modification and Electrolytic Plasma Surface Modification Technologies
22. Two-Step Statistical and Physical–Mechanical Optimization of Electric Arc Spraying Parameters for Enhanced Coating Adhesion
23. The Effect of Electrolytic-Plasma Hardening Time on the Microstructure, Hardness, and Corrosion Behavior of Medium-Carbon Steel
24. Effect of Multilayer Cr/CrN Coatings Deposited by Magnetron Sputtering on the Thermal Stability and High-Temperature Steam Oxidation Resistance of Zirconium Alloy E110
25. Structural and Phase Characteristics and Properties of Multilayer Cr/CrN Coatings Obtained by Magnetron Sputtering
26. Physico-mechanical properties, structure, and phase composition of (BeO + TiO₂)-ceramics containing TiO₂nanoparticles (0.1-2.0 wt.%)
27. EVALUATION OF THE PHASE STABILITY, MICROSTRUCTURE, AND DEFECTS IN HIGH-ENTROPY CERAMICS AFTER HIGH-ENERGY ION IMPLANTATION
28. The Effect of Substrate Treatment on the Properties of TiAlSiYN/CrN Nanocomposite Coatings
29. A Study of the Properties of Two-Layer Coatings Based on TiO₂-Cr₂O₃/Ta
30. Activation of Fluorohydride by Various Chemical Additives for the Production of Construction Materials Based on It
31. Change of 0.34Cr-1Ni-Mo-Fe steel dislocation structure in plasma electrolyte hardening
32. Comparative study of structures and properties of detonation coatings with α-al₂o₃ and γ-al₂o₃ main phases
33. Comprehensive Study of Electrolytic Plasma Nitriding of Austenitic Stainless Steels
34. Creation of bioceramic coatings on the surface of ti–6al–4v alloy by plasma electrolytic oxidation followed by gas detonation spraying
35. DEPOSITION OF DUPLEX Cr₃ C₂-NiCr COATINGS ON STEEL USING A COMBINED TECHNIQUE OF GAS DETONATION SPRAYING AND PULSE-PLASMA TREATMENT
36. Effect of Electrolytic-Plasma Hardening on the Microstructure and Tribological Properties of Low-Alloy Steels
37. Effect of pulsed-plasma treatment on the structural-phase composition and tribological properties of detonation coatings based on Ti–Si–C
38. Effect of Technological Parameters of Detonation Spraying on the Properties of Cr₂O₃ Coatings
39. Effect of Voltage on Properties of 30HGSA Steel Coatings by Supersonic Arc Metallization Method
40. Effects of Ultrasonic Nanocrystal Surface Modification on the Formation of a Nitride Layer in Ti-6Al-4V Alloy
41. Electrolyte-plasma surface hardening of hollow steel applicator needles for point injection of liquid mineral fertilizers
42. Electrolytic Plasma Hardening of 20GL Steel: Thermal Modeling and Experimental Characterization of Surface Modification
43. Electrolytic-Plasma Nitriding of Austenitic Stainless Steels After Mechanical Surface Treatment
44. Environmental Benefits of Fluorogypsum Reuse in the Production of Construction Materials
45. Experimental investigations of Al₂O₃- And ZrO₂-based coatings deposited by detonation spraying
46. Impact of electronic radiation on the morphology of the fine structure of the surface layer of R6M5 steel
47. Influence of gas mixture on the mechanical and physical properties of CrN coatings obtained by magnetron sputtering method
48. Influence of high-speed arc metallization wire feed rate on tribological and corrosion properties of 30HGSA steel coatings
49. Influence of irradiation doses on the mechanical and tribological properties of polyetheretherketone exposed to electron beam treatment
50. Influence of Spraying Parameters on the Structure and Tribological Properties of Cr₃C₂-NiCr Detonation Coatings
1 2