Experimental investigations of Al2O3- And ZrO2-based coatings deposited by detonation spraying
Rakhadilov B. Kantay N. Sagdoldina Z. Erbolatuly D. Bektasova G. Paszkowski M.
May 2021IOP Publishing Ltd
Materials Research Express
2021#8Issue 5
This paper presents the results of experimental investigations of the physical and mechanical properties, structure and surface morphology of Al2O3- and ZrO2-based coatings deposited by detonation spraying. The coatings were sprayed onto titanium-alloyed steel 12Ch18N10T (GOST 4986-79). The thickness of the coatings ranged from 250 to 1100 μm. After the deposition of the coatings the mechanical properties of the steels surface layer significantly improved. Its microhardness increased threefold, reaching the maximum value of over 11 GPa. Also the tribological properties of the material detonation sprayed onto the steel were tested. A significant decrease in the kinetic friction coefficient was observed. For the steel with the ZrO2 coating the friction coefficient decreased by nearly half, reaching the value of 0.330. An increase in abrasive wear resistance was noted. Moreover, the results of electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction examinations evaluating the structural properties and surface morphology of the coatings are presented.
coatings , detonation spraying , hardness , microstructure , tribology
Text of the article Перейти на текст статьи
S. Amanzholov East Kazakhstan University, 18/1 Amurskaya St., Ust-Kamenogorsk, 070002, Kazakhstan
D. Serikbayev East Kazakhstan Technical University, 19 Serikbayev St., Ust-Kamenogorsk, 070003, Kazakhstan
Wroclaw University of Science and Technology, Wybrzeże Stanisława Wyspiańskiego 27, Wrocław, 50-370, Poland
S. Amanzholov East Kazakhstan University
D. Serikbayev East Kazakhstan Technical University
Wroclaw University of Science and Technology
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026