Rakhadilov B 2

51. Influence of Spraying Process Parameters on the Characteristics of Steel Coatings Produced by Arc Spraying Method
52. Influence of Varying the Spraying Distance on the Structural-Phase State and Mechanotribological Properties of 86WC-10Co-4Cr-Based Coatings Obtained by the HVOF Method
53. Investigation of Electrical Discharge Processes During Electrolytic–Plasma Nitrocarburizing
54. Investigation of High-Temperature Oxidation of Homogeneous and Gradient Ni-Cr-Al Coatings Obtained by Detonation Spraying
55. Investigation of the Influence of Powder Fraction on Tribological and Corrosion Characteristics of 86WC-10Co-4Cr Coating Obtained by HVOF Method
56. Investigation of the Influence of the Oxygen Flow Rate on the Mechanical, Structural and Operational Properties of 86WC-10Co-4Cr Coatings, as Determined Using the High-Velocity Oxyfuel Spraying Method
57. Investigation of the structural, mechanical and tribological properties of plasma electrolytic hardened chromium-nickel steel
58. Investigation on the effect of technological parameters of electrolyte-plasma cementation method on phase structure and mechanical properties of structural steel 20X
59. Linear Plasma Device for the Study of Plasma–Surface Interactions
60. Optimization of Cold Gas Dynamic Spray Coatings Using Agglomerated Al–Zn–TiO₂ Powders on Steel
61. Preparation and characterization of nicr/nicr-al₂o₃/al₂o₃ multilayer gradient coatings by gas detonation spraying
62. Preparation of composite powder based on nano-TiO₂ and Cr₂O₃ using a spray dryer, for atmospheric plasma spraying, designed for HPAL systems
63. Selection of Optimal Process Parameters for Arc Metallization
64. Spectroscopic Study of Electrolytic-Plasma Discharge During Hardening of 20GL Steel and Its Effect on Microstructure and Mechanical Properties
65. Structural features and tribological properties of detonation gun sprayed ti–si–c coating
66. Structural Phase Transformations in Detonation Coatings Based on Ti₃SiC₂ after Pulse-Plasma Effect
67. Structure and tribological properties of Ni-Cr-Al-based gradient coating prepared by detonation spraying
68. Study of agglomerated TiO₂ and TiO₂+Cr₂O₃ nanocoatings deposited by air plasma spraying on erosion wear
69. Study of compressed air pressure on the properties of coatings obtained by supersonic metallization
70. Study of structural, surface energies, and tribomechanical properties of thermoplastics irradiated by electron beam
71. Study of Surface Wear of Punches and Molds for Optimization of Nuclear Fuel Production
72. Study of the Influence of Air Plasma Spraying Parameters on the Structure, Corrosion Resistance, and Tribological Characteristics of Fe–Al–Cr Intermetallic Coatings
73. Surface Modification and Tribological Performance of Calcium Phosphate Coatings with TiO₂ Nanoparticles on VT1-0 Titanium by Micro-Arc Oxidation
74. The effect of the electrolyte composition on the microstructure and properties of coatings formed on a titanium substrate by microarc oxidation
75. The impact of technological parameters of electrolytic-plasma treatment on the changes in the mechano-tribological properties of steel 45
76. The Influence of Distance Pulsed Plasma Treatment on the Structure and Properties of Detonation Coatings from Eutectic Alloy Fe-TiB₂-CrB₂
77. Use of Computational Fluid Dynamics (CFD) Methods to Analyze Combustion Chamber Processes at HVOF Spraying and Their Comparison with Experimental Data
78. The Effect of the Granulometric Composition of Slags on the Efficiency of Non-Ferrous Metal Extraction
79. Comprehensive Study of the Mechanical and Tribological Properties of NiCr-Al Detonation Coatings
80. Effect of irradiation with Si⁺ ions on phase transformations in Ti–Al system during thermal annealing
81. Magnesium Oxide Production by Plasma Chemical Conversion from Fluorine-Containing Industrial Waste
82. Effect of Micro-Arc Oxidation Voltage on the Surface Morphology and Properties of Ceramic Coatings on 7075 Aluminum Alloy
83. Electrolytic Plasma Nitriding of Medium-Carbon Steel 45 for Performance Enhancement
84. Surface Modification of Chromium–Nickel Steel by Electrolytic Plasma Nitriding Method
85. Surface modification of coatings based on Ni-Cr-Al by pulsed plasma treatment
86. Influence of TiO₂ Nanoparticle Concentration on Micro-Arc Oxidized Calcium–Phosphate Coatings: Corrosion Resistance and Biological Response
1 2 2