Kengesbekov A 1
1. Influence of Mechanical Activation on the Evolution of TiSiCN Powders for Reactive Plasma Spraying
2. Production of Anhydrite Binder from Waste Fluorangydrite
3. Design and Characterization of Ceramic Bricks with Industrial Waste and Silica–Carbon-Based Additives
4. Detonation Spraying of Functionally Graded Hydroxyapatite/Titanium Coatings on Ti–6Al–4V Alloy
5. Effect of Helium Plasma Irradiation on Microstructures and Mechanical Properties of Tungsten
6. Formation of Titanium Oxynitride Films by Reactive Magnetron Sputtering, Their Structural Features and Properties
7. Improving the Efficiency of Air Plasma Spraying of Titanium Nitride Powder
8. Influence of Plasma Arc Current and Gas Flow on the Structural and Tribological Properties of TiN Coatings Obtained by Plasma Spraying
9. Synthesis and Formation Mechanism of Metal Oxide Compounds
10. The Influence of Powder Composition and Hydrogen Consumption on the Structural, Corrosion and Tribological Characteristics of Fe-Cr-Al Coatings Obtained by Air Plasma Spraying
11. Research on the Structural–Phase and Physical–Mechanical Characteristics of the Cr3C2-NiCr Composite Coating Deposited by the HVOF Method on E110 Zirconium Alloy
12. Physico-mechanical properties, structure, and phase composition of (BeO + TiO2)-ceramics containing TiO2nanoparticles (0.1-2.0 wt.%)
13. Activation of Fluorohydride by Various Chemical Additives for the Production of Construction Materials Based on It
14. Environmental Benefits of Fluorogypsum Reuse in the Production of Construction Materials
15. Impact of electronic radiation on the morphology of the fine structure of the surface layer of R6M5 steel
16. Influence of Spraying Process Parameters on the Characteristics of Steel Coatings Produced by Arc Spraying Method
17. Preparation of composite powder based on nano-TiO2 and Cr2O3 using a spray dryer, for atmospheric plasma spraying, designed for HPAL systems
18. Study of Surface Wear of Punches and Molds for Optimization of Nuclear Fuel Production
19. Study of the Influence of Air Plasma Spraying Parameters on the Structure, Corrosion Resistance, and Tribological Characteristics of Fe–Al–Cr Intermetallic Coatings
20. The Influence of Distance Pulsed Plasma Treatment on the Structure and Properties of Detonation Coatings from Eutectic Alloy Fe-TiB2-CrB2
21. Use of Computational Fluid Dynamics (CFD) Methods to Analyze Combustion Chamber Processes at HVOF Spraying and Their Comparison with Experimental Data
22. Effect of irradiation with Si+ ions on phase transformations in Ti–Al system during thermal annealing
23. Influence of TiO2 Nanoparticle Concentration on Micro-Arc Oxidized Calcium–Phosphate Coatings: Corrosion Resistance and Biological Response
1