Plasmascience Llp 2

51. Preparation and characterization of nicr/nicr-al₂o₃/al₂o₃ multilayer gradient coatings by gas detonation spraying
52. Selection of Optimal Process Parameters for Arc Metallization
53. Structural Phase Transformations in Detonation Coatings Based on Ti₃SiC₂ after Pulse-Plasma Effect
54. Structure and properties of multilayer coatings based on CoCrAlY/Al₂O₃ obtained by detonation spraying
55. Structure and tribological properties of Ni-Cr-Al-based gradient coating prepared by detonation spraying
56. Study of agglomerated TiO₂ and TiO₂+Cr₂O₃ nanocoatings deposited by air plasma spraying on erosion wear
57. Study of the Influence of Air Plasma Spraying Parameters on the Structure, Corrosion Resistance, and Tribological Characteristics of Fe–Al–Cr Intermetallic Coatings
58. Surface Modification and Tribological Performance of Calcium Phosphate Coatings with TiO₂ Nanoparticles on VT1-0 Titanium by Micro-Arc Oxidation
59. The effect of the electrolyte composition on the microstructure and properties of coatings formed on a titanium substrate by microarc oxidation
60. The Influence of Distance Pulsed Plasma Treatment on the Structure and Properties of Detonation Coatings from Eutectic Alloy Fe-TiB₂-CrB₂
61. Tribological and Mechanical Properties of Gradient Coating on Al₂O₃-Based Coating Produced by Detonation Spraying Methods
62. Use of Computational Fluid Dynamics (CFD) Methods to Analyze Combustion Chamber Processes at HVOF Spraying and Their Comparison with Experimental Data
63. The Effect of the Granulometric Composition of Slags on the Efficiency of Non-Ferrous Metal Extraction
64. Comprehensive Study of the Mechanical and Tribological Properties of NiCr-Al Detonation Coatings
65. Effect of irradiation with Si⁺ ions on phase transformations in Ti–Al system during thermal annealing
66. Magnesium Oxide Production by Plasma Chemical Conversion from Fluorine-Containing Industrial Waste
67. Modification of the Surface of 40 Kh Steel by Electrolytic Plasma Hardening
68. Electrolytic Plasma Nitriding of Medium-Carbon Steel 45 for Performance Enhancement
69. Surface Modification of Chromium–Nickel Steel by Electrolytic Plasma Nitriding Method
70. Review of Physical and Mechanical Properties, Morphology, and Phase Structure in Cr₃C₂-NiCr Composite Coatings Sprayed by HVOF Method
71. Surface modification of coatings based on Ni-Cr-Al by pulsed plasma treatment
72. Influence of TiO₂ Nanoparticle Concentration on Micro-Arc Oxidized Calcium–Phosphate Coatings: Corrosion Resistance and Biological Response
1 2 2