The Institute Of Metallurgy And Ore Beneficiation 1
1. Comparative Analysis of Acid Leaching for the Efficient Recovery of Lanthanum and Cerium from Phosphate
2. Formation of Electrode Materials in the Process of Carbothermic Flux Smelting of Ilmenite Concentrate and Hydrothermal Refining of Titanium Slag
3. Selection of Binder Materials for the Production of Extruded Briquettes
4. Correction: Sodium Percarbonate for Eco-Efficient Cyanide Detoxification in Gold Mining Tailings (Metals, (2025), 15, 10, (1162), 10.3390/met15101162)
5. Sodium Percarbonate for Eco-Efficient Cyanide Detoxification in Gold Mining Tailings
6. Synthesis of Manganese Oxide Sorbent for the Extraction of Lithium from Hydromineral Raw Materials
7. Technology for Complex Processing of Electric Smelting Dusts of Ilmenite Concentrates to Produce Titanium Dioxide and Amorphous Silica
8. Harnessing Microwave Technology for Enhanced Recovery of Zinc from Industrial Clinker
9. Innovative Methods for Intensifying the Processing of Zinc Clinker: Synergy of Microwave Treatment and Ultrasonic Leaching
10. Interaction of liquid titanium with zirconates and titanates of some alkaline earth metals
11. Investigation of Phase Transformations in Technogenic Raw Materials Under Microwave Treatment for Enhanced Zinc Leaching
12. Microwave Pre-Treatment for Efficient Zinc Recovery via Acid Leaching
13. Optimized Hydrometallurgical Extraction of Molybdenum via Mechanoactivation and Nitric–Sulfuric Leaching
14. Processing of Ilmenite Concentrate with High Chromium Content
15. Tribological Characteristics of Multilayer TiN/TiCN Coatings Compared to TiN Coatings
16. Comparative Study of Tribological and Corrosion Characteristics of TiCN, TiCrCN, and TiZrCN Coatings
17. Effect of Magnetron Sputtering Deposition Conditions on the Mechanical and Tribological Properties of Wear-Resistant Titanium Carbonitride Coatings
18. Influence of Current Duty Cycle and Voltage of Micro-Arc Oxidation on the Microstructure and Composition of Calcium Phosphate Coating
19. Mechanical Grinding of Hydroxyapatite and Its Interaction with Titanium
20. Effect of Carbon and Cooling Rate on the Structure of Hypereutectic High Chromium Cast Iron in the Cast State and after Heat Treatment
21. Studies of Niobium Sorption from Chloride Solutions with the Use of Anion-Exchange Resins
22. Studies on the Processing of Fine Dusts from the Electric Smelting of Ilmenite Concentrates to Obtain Titanium Dioxide
1