International School Of Engineering 1
1. Microstructure and Dry-Sliding Tribology of Thermal-Spray Coatings on Cu for Continuous Casting Molds
2. Effect of ultrasonic nanocrystalline surface modification on hardness and elastic modulus of Ti-6Al-4V alloy
3. Factor-Based Analysis of Certification Validity in Engineering Safety
4. New Approach to Effective Dry Grinding of Materials by Controlling Grinding Media Actions
5. Investigation of Structural Phase, Mechanical, and Tribological Characteristics of Layer Gradient Heat-Protective Coatings Obtained by the Detonation Spraying Method
6. Efficiency Justification for Modernizing a Grain Screw Extruder to Produce Feed Additives from Crop Residues
7. Efficiency Justification for Modernizing a Grain Screw Extruder to Produce Feed Additives from Crop Residues
8. Improving the efficiency of fine grinding of materials in a new inverted impact grinder with enhanced energy-technological performance
9. Influence of Pulse-Plasma Treatment Distance on Structure and Properties of Cr3C2-NiCr-Based Detonation Coatings
10. Microstructure and Mechanical Properties of Equiatomic CoCrFeNiMn High-Entropy Alloy Coatings Fabricated by High-Velocity Oxygen Fuel Spraying
11. Optimization of Copper Recovery from Cyanide Leaching Solutions Used in Gold–Copper Ore Processing Using Probabilistic–Deterministic Experimental Design
12. Theoretical and experimental study of the dependence of bulldozer blade digging energy consumption on its main parameters, cutting angle, and soil strength
13. Experimental and Mathematical Modelling Investigation of Plasma Electrolytic Oxidation (PEO) for Surface Hardening of 20Ch Steel
14. Microplasma Sprayed Tantalum Coatings on Ti Grade 5 Extra-Low Interstitials: Investigation of Thickness and Porosity Control
15. Advancement of Mine Opening Support Technologies when Drifting in Faulted and Intensely Fractured Conditions
16. Preparation of Composite Materials Based on Acrylonitrile–Butadiene–Styrene Flame-Retardant Plastic Obtained from Electronic Waste and Fly Ash Microspheres, with Thermogravimetric/Differential Scanning Calorimetry Analysis and a Study of the Mechanical Characteristics of the Obtained Material
17. Physicochemical Characteristics of Copper Smelting Slags from Kazakhstan and Their Potential for Secondary Resource Recovery
18. Dimensional Deviations of Horizontal Thin Wall of Titanium Alloy Ti6Al4V Determined by Optical and Contact Methods
19. A Novel Hematite-Catalyzed Approach for Iron Removal from Zinc Sulfate Solutions
20. Study of the Hydrometallurgical Processing of Jarosite Residues
21. The Influence of Co–Cr, Ni and NiCr Binders on the Performance of WC Coatings Deposited by Detonation Spraying
22. Exothermic Effects and Viscosity of Oxide Melts Formed During High-Temperature Reduction of Cr–Mn Ore Systems
23. Production of Chromium–Manganese Ligature from Low-Grade Chromium and Iron–Manganese Ores Using Silicon–Aluminum Alloys as Reductants
24. Sustainable Production of Chromium–Manganese Ligatures from Low-Grade Iron–Manganese Ore and Ferrosilicochrome Dust: Thermodynamic Modeling and Experimental Verification
25. Structural and Phase Characteristics of LaNi5-Based Materials Modified with Ti, Mn, and Co
26. Influence of Varying the Spraying Distance on the Structural-Phase State and Mechanotribological Properties of 86WC-10Co-4Cr-Based Coatings Obtained by the HVOF Method
27. Investigation of the Influence of Powder Fraction on Tribological and Corrosion Characteristics of 86WC-10Co-4Cr Coating Obtained by HVOF Method
28. Investigation of the Influence of the Oxygen Flow Rate on the Mechanical, Structural and Operational Properties of 86WC-10Co-4Cr Coatings, as Determined Using the High-Velocity Oxyfuel Spraying Method
29. Use of Computational Fluid Dynamics (CFD) Methods to Analyze Combustion Chamber Processes at HVOF Spraying and Their Comparison with Experimental Data
30. Microstructure, Hardness and Tribological Characteristics of High-Entropy Coating Obtained by Detonation Spraying
31. Review of Physical and Mechanical Properties, Morphology, and Phase Structure in Cr3C2-NiCr Composite Coatings Sprayed by HVOF Method
32. Ecological Status of the Small Rivers of the East Kazakhstan Region
33. Features of Ash and Slag Formation During Incomplete Combustion of Coal from the Karazhyra Deposit in Small- and Medium-Scale Power Plants
34. Production Waste Management: Qualitative and Quantitative Characteristics and the Calculation of the Hazard Class of Phosphogypsum
35. Production of Metallurgical Sinter with Coke Modified by Spent Anode Material from Aluminum Electrolysis
36. Evaluation of Metaverse as a Learning Environment and Level of Technology Acceptance: An Engineering Example
37. Secure and Energy-Aware Cryptographic Framework for IoT-Enabled UAV Systems
1