Institute Of Combustion Problems 4

151. A Low-Cost IoT Sensor and Preliminary Machine-Learning Feasibility Study for Monitoring In-Cabin Air Quality: A Pilot Case from Almaty
152. Biomass Derived High Porous Carbon via CO₂ Activation for Supercapacitor Electrodes
153. Biomass Derived High Porous Carbon via CO₂ Activation for Supercapacitor Electrodes
154. Investigations of Activated Carbon from Different Natural Sources for Preparation of Binder-Free Few-Walled CNTs/Activated Carbon Electrodes
155. Investigations of Activated Carbon from Different Natural Sources for Preparation of Binder-Free Few-Walled CNTs/Activated Carbon Electrodes
156. Nanocellulose and carbon nanotube composites: A universal solution for environmental and energy challenges
157. Valorization of Grass Clipping Waste: A Sustainable Approach to Cellulose Extraction and Paper Manufacturing
158. Identification and Characterization of Sulfur Cake from Stepnogorsk Sulfuric Acid Plant
159. Oxidative Upgrading of Heavy Oil Residues with Polymer-Based Wastes for Sustainable Bitumen Production
160. The Separation of Oil from Oil-Contaminated Soils Using Thermal Treatment
161. Research in the Commonwealth of Independent States on Superconducting Materials: Current State and Prospects
162. Hydroprocessing of Gasoline on Modified Alumina Catalysts
163. Mechanochemical Synthesis of Hydrophilic Sulfur Nanoparticles in Aqueous Surfactant Solutions and Their Antibacterial Activity and Acute Toxicity in Mice
164. Selective Electrochemical Leaching of Copper from Fragmented Waste Printed Circuit Boards in an Alkaline Sulfate–Glycine Electrolyte
165. A comprehensive kinetic modeling study of ethylene combustion with data uncertainty analysis
166. Energetic Metal–Organic Frameworks: Thermal Behaviors and Combustion of Nickel Oxide (II) Based on Activated Carbon Compositions
167. The Impact of Activated Carbon–Me_xO_y (Me = Bi, Mo, Zn) Additives on the Thermal Decomposition Kinetics of the Ammonium Nitrate–Magnesium–Nitrocellulose Composite
168. Thermal Characteristics Enhancement of AN/Mg/NC Composite Using Activated Carbon/Cobalt Oxide as Highly Effective Catalytic Additive
169. Synthesis of graphene-like porous carbon from biomass for electrochemical energy storage applications
170. Advancements in catalytic, photocatalytic, and electrocatalytic CO₂ conversion processes: Current trends and future outlook
171. Catalytic Decomposition of Methane to Hydrogen over Al₂O₃Supported Mono- and Bimetallic Catalysts
172. CO₂ and steam-CO₂ reforming of ethanol over CuО/Al₂O₃ catalysts: Influence of additives on catalyst coking
173. Effect of Lanthanum Oxide on the Activity Ni-Co/Diatomite Catalysts in Dry Reforming of Methane
174. Effect of Preparation Method on the Activity of Fe₂O₃-NiO/γ-Al₂O₃ Catalyst in Decomposition of Methane
175. Electrochemical synthesis of Fe-containing composite for decomposition of methane into COx-free hydrogen and nano-carbon
176. Effect of nitrogen concentration on titanium nitride thin film formation
177. Modification and Application of Natural Clinoptilolite and Mordenite from Almaty Region for Drinking Water Purification
178. Advances of Biowaste-Derived Porous Carbon and Carbon–Manganese Dioxide Composite in Supercapacitors: A Review
179. Increasing the yield of light distillates by wave action on oil raw materials
180. Effect of Nanostructured Shungite on the Rheological Properties of Bitumen
181. Mechanochemically Activated Shungite as an Additive to Improve Bitumen Characteristics
182. Oxidation of Vacuum Residue with the Addition of Crumb Rubber
183. Extraction of Phenolic Compounds from Wild Hemp Stem Using Superheated Water
184. Morphological and Physicochemical Properties of Nanostructured Cellulose Obtained through Chemical and Biological Methods
1 2 3 4 4