Department Of Mechanical And Aerospace Engineering 2

51. Porous polyvinyl alcohol/graphene oxide composite film for strain sensing and energy-storage applications
52. Influence of fused filament fabrication parameters on the flexural strength of nylon
53. Investigation on the mechanical performance of mono-material vs multi-material interface geometries using fused filament fabrication
54. Mechanical Properties and Economic Analysis of Fused Filament Fabrication Continuous Carbon Fiber Reinforced Composites
55. Impact of the Mg/Zn ratio on features of structural and magnetic properties in A-site stoichiometric nanosized spinel ferrites
56. Evaluation of water desalination performances of functionalized nanoporous graphene membranes by molecular dynamics simulation
57. A non-linear model for elastic hysteresis in the time domain: Computational procedure
58. A non-linear model for elastic hysteresis in the time domain: Implementation for multiple degrees of freedom
59. Review of Control Strategies for Improving the Photovoltaic Electrical Efficiency by Hybrid Active Cooling
60. Thermal rectification in novel two-dimensional hybrid graphene/BCN sheets: A molecular dynamics simulation
61. Parametric study of sewage sludge gasification in air and steam environments: Experimental and process simulation
62. Efficient production of ultrafine poly-p-phenylene benzobisoxazole nanofibres for high-performance polyurea nanocomposites
63. A multi-scale computational framework for the hygro-thermo-mechanical analysis of laminated composite structures with carbon nanotube inclusions
64. Tailoring the theory of critical distances to better assess the combined effect of complex geometries and process-inherent defects during the fatigue assessment of SLM Ti-6Al-4V
65. Perioperative Glycemia Management in Patients Undergoing Craniotomy for Brain Tumor Resection: A Global Survey of Neuroanesthesiologists’ Perceptions and Practices
66. Boron nitride nanoslits for water desalination via forward osmosis: A molecular dynamics study
67. Machine Learning-Assisted design of boron and nitrogen doped graphene nanosheets with tailored thermomechanical properties
68. Microstructural evolution and crystalline behavior in silicon carbide nano-powder during selective laser melting: A molecular dynamics simulation
69. Recent advancements in mechanical properties of graphene-enhanced polymer nanocomposites: Progress, challenges, and pathways forward
70. Carbon nanotubes/α-ZrP sheets for high mechanical performance and flame-retarding polyamides using selective laser sintering
71. NiCo₂S₄ Nanocrystals on Nitrogen-Doped Carbon Nanotubes as High-Performance Anode for Lithium-Ion Batteries
72. Supramolecular-Wrapped α-Zirconium Phosphate Nanohybrid for Fire Safety and Reduced Toxic Emissions of Thermoplastic Polyurethane
73. Synergetic Effect of α-ZrP Nanosheets and Nitrogen-Based Flame Retardants on Thermoplastic Polyurethane
74. Material extrusion of biomaterials for transformative biomedical applications
75. Piezoelectric-Triboelectric Hybrid Nanogenerator for Energy Harvesting and Self-Powered Sensing Applications
76. Preparation of a Ni₃Sn₂ alloy-type anode embedded in carbon nanofibers by electrospinning for lithium-ion batteries
77. Optimization of Non-Newtonian Flow through a Coat-Hanger Die Using the Adjoint Method
78. Pneumatic starting auxiliary device for optimising the start-up of mining machines with heavy rotors
79. Design and development of a 3D printed water driven spinal posture corrector
80. AI-Enhanced Gait Analysis Insole with Self-Powered Triboelectric Sensors for Flatfoot Condition Detection
81. Biomass-derived porous carbon from agar as an anode material for lithium-ion batteries
82. Green Synthesis of SnO₂/Carbon Composite Anode for Low-Temperature Lithium-Ion Batteries
83. LiF modified hard carbon from date seeds as an anode material for enhanced low-temperature lithium-ion batteries
84. Room temperature growth of NiS hierarchical nanoflowers on the flexible electrode surface as a cathode for lithium-ion batteries
85. Three-dimensional foam-type current collectors for rechargeable batteries: A short review
86. Bonding Strength Analysis of Multi-material and Multi-color Specimens Printed with Multi-extrusion Printer
87. Periodic solutions and the avoidance of pull-in instability in nonautonomous microelectromechanical systems
88. Incorporating MIL-125 Metal-Organic Framework for Flexible Triboelectric Nanogenerators and Self-Powered Sensors for Robotic Grippers
89. Investigation of Stereolithography Additively Manufactured Components for Deviations in Dimensional and Geometrical Features
90. 3D hierarchical nanocrystalline cus cathode for lithium batteries
91. A multi-objective macro-geometry spur gear optimization process to improve weight, efficiency and NVH performance utilizing neural networks
92. Decision Analysis for Transporting Critically Ill Patients with Cardiovascular Diseases
93. Arbitrary Hybrid Turbulence Modeling Approach for High-Fidelity NREL Phase VI Wind Turbine CFD Simulation
94. A hybrid fluorescent nanofiber membrane integrated with microfluidic chips towards lung-on-a-chip applications
95. Hierarchical porous adsorbent from asphaltenes fibers and its application for methyl orange removal
96. Physics-informed geometric operators to support surrogate, dimension reduction and generative models for engineering design
97. ShipHullGAN: A generic parametric modeller for ship hull design using deep convolutional generative model
98. Development of carbon capture and storage (CCS) hubs in Kazakhstan
99. Powder-Mixed Micro Electrical Discharge Machining-Assisted Surface Modification of Ti-35Nb-7Zr-5Ta Alloy in Biomedical Applications †
100. A physics-informed parametrization and its impact on 2D IGABEM analysis
1 2 3 4 5