Institute of Metallurgy and Ore Beneficiation JSC 2
51. Fine-grаined fiber concrete using polypropylene аnd bаsаlt fibers
52. Flotation processing of copper-containing technogenic raw materials using a composite flotation reagent
53. Forecasting the involvement of residual reserves in the development of a late-stage field
54. Gold and rare earth elements in enrichment products from the technogenic wastes of the Caspian Mining-Metallurgical Plant (Aktau, Kazakhstan)
55. Hydrometallurgical studies on the leaching of copper from man-made mineral formations
56. Hydrothermal treatment of sinters containing thiosalts of non-ferrous metals
57. Improving the efficiency of methane extraction from coal seams
58. Improving the quality ofconverting products by the joint smelting of highsulfur copper concentrate with copper-lead matte
59. Incorporation of neodymium, holmium, erbium, and samarium (oxides) in zinc-borotellurite glass: Physical and optical comparative analysis
60. Influence of granule structure mineral fertilizers for their physical and chemical properties
61. Influence of manganese additives on the microstructure of the Al-Fe-Si alloy system synthesized through arc surfacing with a consumable electrode
62. Influence of Radiation and Magnetic Pulse Treatment on The Wear Resistance of Carbide Tools
63. Influence of silica on the crystallization of sodium hydroaluminate
64. Influеncе of bаsаlt fibеr lеngth on strеngth chаrаctеristics of finе-grаinеd fibеr concrеtе
65. Innovative technologies for paraffin deposit removal in oil tubing to enhance oil recovery: a mechanical approach
66. Investigation of optical and physico-chemical properties of titanium-doped V2O5 nanofilms
67. Investigation of the beneficiation of refractory ferromanganese ores “Zhomart” deposits
68. Investigation of the possibility of using depleted bauxite in alumina production at the Pavlodar aluminum plant
69. Investigation of the Technology of Introducing Li, Mg and Zr Alloys into Aluminum Alloy
70. Investigation of zinc leaching from clinker with pretreatment of raw materials by ultrahigh frequency radiation (microwave)
71. Isothermal laminar flow of non-newtonian fluid with yield stress in a pipe
72. Justification of the stress-strain state’s parameters of the mine workings contours depending on the influencing factors
73. Lightweight structural thermal insulation concrete using TPP ash
74. Lithium extraction methods and its application prospects: a review
75. Magnesia composite materials for layered products
76. Mathematical model of the formation of barite-lead mineralization of the Ushkatyn III deposit (Central Kazakhstan)
77. Mathematical modeling of sulfuric acid leaching of pyrite cinders after preliminary chemical activation
78. Mechanism and technological results of sulfidation roasting of oxidized lead compounds
79. Methodological principles of searching for disposal sites of radioactively contaminated materials by geophysical methods
80. Methods for Analysis and Improvement of Dynamic Loads on the Steel Wire Rope Holding the Boom of Steel Wire Rope Excavators
81. Methods for purifying table salt from the Bakhyt-Тany deposit
82. Methods for purifying table salt from the Suzak deposit
83. Microstructure and tribological study of TiAlCN and TiTaCN coatings
84. Mini review polyurethane hybrids: preparation, characterization and applications
85. Mismatch problem of the model and topology of oil pumping facilities
86. Modeling the influence of technological parameters of the magnetron sputtering process using the Caroline D12C system on the proportion of nanocrystallites in the structure of thin silicon films
87. Modern data analysis technologies used for geomechanical monitoring. Review
88. Modified bitumen-polymer mastic to protect metal coatings from corrosion
89. Monitoring of the earths surface and mining facilities by radar interferometry
90. Monitoring of the stress-strain state during preparatory workings
91. Morphological and Crystallographic Investigation of CVD-Grown MoS₂
92. Natural mineral raw materials as granular filtering materials in industrial and waste water treatment
93. Nature of ree accumulation in clayey interlayers and coals in Karaganda coal basin
94. Numerical modeling of the task of support tension near cleaning
95. On the degree of influence of waterflooding on the oil recovery factor from productive formations of high-viscosity reservoirs X, represented by terrigenous reservoirs
96. On the influence of iron and silicon content on the phase composition of the Al-Fe-Si system
97. On the matter of composition and technological properties of uranium ores of the Semizbai deposit (North Kazakhstan)
98. Operational properties of cement-free concrete with porous aggregate
99. Optimal concentration of post-alcohol bard and microsilica in cement-sand mixtures determination
100. Optimization of joint electric smelting of the Shalkiya sulfide ore and its beneficiation tailings with medium-silicon ferrosilicon production
1 2 3 4