AIMS Press 1
1. Agglomeration and dissolution of iron oxide nanoparticles in simplest biological media
2. Applying the Hollomon-Jaffe parameter to predict changes in mechanical properties of irradiated austenitic chromium-nickel steels during isothermal exposure
3. Assessment of the effect of small additions of some rare earth elements on the structure and mechanical properties of castings from hypereutectic chromium white irons
4. Effect of ultrasonic nanocrystalline surface modification on hardness and elastic modulus of Ti-6Al-4V alloy
5. Electrolyte-plasma surface hardening of hollow steel applicator needles for point injection of liquid mineral fertilizers
6. Experimental characterization of mechanical properties and microstructure study of polycarbonate (PC) reinforced acrylonitrile-butadiene-styrene (ABS) composite with varying PC loadings
7. Hydrogen production by methane pyrolysis in the microwave discharge plasma
8. Improving the efficiency of hydrogen storage in LaNi5-based materials through cobalt modification
9. Influence of gas mixture on the mechanical and physical properties of CrN coatings obtained by magnetron sputtering method
10. Influence of helium plasma on the structural state of the surface carbide layer of tungsten
11. Information-analytical system as a tool for research and prediction of the behavior of the melt of the core of a nuclear reactor
12. Investigation on the effect of technological parameters of electrolyte-plasma cementation method on phase structure and mechanical properties of structural steel 20X
13. Microstructural stability of a two-phase (O + B2) alloy of the Ti–25Al–25Nb system (at.%) during thermal cycling in a hydrogen atmosphere
14. Results of experimental simulation of interaction between corium of a nuclear reactor and sacrificial material (Al2O3) with a lead layer
15. Surface modification of coatings based on Ni-Cr-Al by pulsed plasma treatment
16. The effect of recrystallization annealing on the tungsten surface carbidization in a beam plasma discharge
17. The effect of the electrolyte composition on the microstructure and properties of coatings formed on a titanium substrate by microarc oxidation
18. The impact of technological parameters of electrolytic-plasma treatment on the changes in the mechano-tribological properties of steel 45
19. The influence of cooling rate on the structure and properties of castings of hypereutectic high-chromium cast iron when they are modified with B, Bi, Sb, Sn, Ca
20. The input of microorganisms to the cultivation of mushrooms on lignocellulosic waste
1