Department Of Metal Forming 1
1. Technology for Obtaining Silicon Dioxide from Rice Husk Using Microwave Irradiation
2. Stress state and power parameters during pulling workpieces through a special die with an inclined working surface
3. The use of rice husk ash as a potential filler in formulations of elastomeric compositions for rubber-metal vibration isolators
4. Investigations on the Microstructure and Corrosion Performance of Different WC-based Cermet Coatings Deposited by High Velocity Oxy Fuel Process onto Magnesium Alloy Substrate
5. Microplasma spraying of hydroxyapatite coatings on additive manufacturing titanium implants with trabecular structures
6. Microplasma-sprayed multilayer coatings for electric heating elements
7. Thermodynamic Simulation of Environmental and Population Protection by Utilization of Technogenic Tailings of Enrichment
8. Physico-Chemical Study of the Possibility of Utilization of Coal Ash by Processing as Secondary Raw Materials to Obtain a Composite Cement Clinker
9. Obtaining Symmetrical Gradient Structure in Copper Wire by Combined Processing
10. Thermomechanical treatment influence on the copper wire microstructure evolution
11. Effect of thermomechanical processing of building stainless wire to increase its durability
12. Formation of Symmetric Gradient Microstructure in Carbon Steel Bars
13. Improvement of strength and performance properties of copper wire during severe plastic deformation and drawing process
14. Increasing strength and performance properties of bimetallic rods during severe plastic deformation
15. INVESTIGATION OF THE STRESS-STRAIN STATE DURING NEW COMBINED DEFORMATION TECHNOLOGY
16. INVESTIGATION OF THE STRESS-STRAIN STATE DURING NEW COMBINED DEFORMATION TECHNOLOGY
17. Study of changes in microstructure and metal interface Cu/Al during bimetallic construction wire straining
18. Study of the Properties of Antifriction Rings under Severe Plastic Deformation
19. Symmetrical Martensite Distribution in Wire Using Cryogenic Cooling
20. Studies of the Possibility of Improving the Quality of Iron Ores and Processing of Technogenic Composite Iron-Containing Waste of Metallurgical Production
1