Kakimzhanov D 1
1. Microstructure and Dry-Sliding Tribology of Thermal-Spray Coatings on Cu for Continuous Casting Molds
2. The Influence of Wire Type on the Properties and Characteristics of Coatings Obtained by the Arc Metallization Method
3. Influence of Pulse-Plasma Treatment Distance on Structure and Properties of Cr3C2-NiCr-Based Detonation Coatings
4. Structural and Phase Transformations in Detonation Coatings Made of Eutectic Fe–TiB2–CrB2 Alloy After Pulsed Plasma Exposure
5. Research on the Structural–Phase and Physical–Mechanical Characteristics of the Cr3C2-NiCr Composite Coating Deposited by the HVOF Method on E110 Zirconium Alloy
6. A Study of the Properties of Two-Layer Coatings Based on TiO2-Cr2O3/Ta
7. Comparative study of structures and properties of detonation coatings with α-al2o3 and γ-al2o3 main phases
8. DEPOSITION OF DUPLEX Cr3 C2-NiCr COATINGS ON STEEL USING A COMBINED TECHNIQUE OF GAS DETONATION SPRAYING AND PULSE-PLASMA TREATMENT
9. Effect of Technological Parameters of Detonation Spraying on the Properties of Cr2O3 Coatings
10. Effect of Voltage on Properties of 30HGSA Steel Coatings by Supersonic Arc Metallization Method
11. Influence of high-speed arc metallization wire feed rate on tribological and corrosion properties of 30HGSA steel coatings
12. Influence of Spraying Parameters on the Structure and Tribological Properties of Cr3C2-NiCr Detonation Coatings
13. Influence of Spraying Process Parameters on the Characteristics of Steel Coatings Produced by Arc Spraying Method
14. Influence of Varying the Spraying Distance on the Structural-Phase State and Mechanotribological Properties of 86WC-10Co-4Cr-Based Coatings Obtained by the HVOF Method
15. Investigation of the Influence of Powder Fraction on Tribological and Corrosion Characteristics of 86WC-10Co-4Cr Coating Obtained by HVOF Method
16. Investigation of the Influence of the Oxygen Flow Rate on the Mechanical, Structural and Operational Properties of 86WC-10Co-4Cr Coatings, as Determined Using the High-Velocity Oxyfuel Spraying Method
17. Modification of coatings based on al2o3 with concentrated energy flows
18. Preparation and characterization of nicr/nicr-al2o3/al2o3 multilayer gradient coatings by gas detonation spraying
19. Preparation of composite powder based on nano-TiO2 and Cr2O3 using a spray dryer, for atmospheric plasma spraying, designed for HPAL systems
20. Selection of Optimal Process Parameters for Arc Metallization
21. Structural Phase Transformations in Detonation Coatings Based on Ti3SiC2 after Pulse-Plasma Effect
22. Study of agglomerated TiO2 and TiO2+Cr2O3 nanocoatings deposited by air plasma spraying on erosion wear
23. Study of compressed air pressure on the properties of coatings obtained by supersonic metallization
24. The Influence of Distance Pulsed Plasma Treatment on the Structure and Properties of Detonation Coatings from Eutectic Alloy Fe-TiB2-CrB2
25. Review of Physical and Mechanical Properties, Morphology, and Phase Structure in Cr3C2-NiCr Composite Coatings Sprayed by HVOF Method
26. Influence of TiO2 Nanoparticle Concentration on Micro-Arc Oxidized Calcium–Phosphate Coatings: Corrosion Resistance and Biological Response
1