MATHEMATICAL MODELING OF THE NON-STATIONARY THERMAL STATE OF A COMPOSITE COATING OF CLOSE TO EQUIMOLAR COMPOSITION DURING LASER REMELTING

Yachikov I. Naizabekov A. Lezhnev S. Myasnikova A. Trofimov E. Panin E. Samodurova M.
2024 University of Chemical Technology and Metallurgy

Journal of Chemical Technology and Metallurgy
2024 #59 Issue 5 1215 - 1226 pp.

Based on assumptions and limitations, a mathematical model of the non-stationary thermal state of a composite coating during laser remelting on a metal substrate to obtain an alloy of equimolar or close to equimolar composition has been developed. The model includes the boundary value problem of calculating the nonstationary thermal state of the temperature distribution in the solid, two-phase and liquid regions, considering the heat release of crystallization according to the theory of a quasi-equilibrium two-phase zone in the presence of porosity of a mixture of metal powders. Based on the mathematical model, the computer program “Composite coating thermal state” was created, which allows to determine the non-stationary temperature distribution in the formed coating and substrate, the depth of penetration of the high-entropy coating layer, to evaluate the shrinkage of the molten coating under different technological conditions: laser power, the diameter of its focal spot, as well as the speed of movement along the surface of the processed material. The created program also allows to determine the dynamics of the position of two-dimensional liquidus and solidus lines for each metal included in the mixture. Using the created program, a computer simulation of the process of unsteady heating of a mixture of three metal powders in the same mass fractions: nickel, chromium and iron was carried out. Non-stationary temperature fields in the composite coating are obtained, considering its penetration and heating of the substrate. The depth of penetration of all metals, including the most low-melting one, was determined during laser remelting on a metal substrate in the production of a high-entropy alloy. The practical significance of the developed computer model lies in its use to predict the penetration depth of a composite coating under specified technological modes of laser remelting. At the same time, its adaptation is necessary, based on experimental data on the porosity and thickness of the coating before and after melting of simple metal systems with similar thermophysical properties.

composite coatings , laser surfacing , mathematical modelling , multicomponent base alloys , non-stationary thermal state

Text of the article Перейти на текст статьи

South Ural State University, 76 Lenin prospect, Chelyabinsk, 454000, Russian Federation
Rudny Industrial Institute, 38 50 let Oktyabrya St., Rudny, 111500, Kazakhstan

South Ural State University
Rudny Industrial Institute

10 лет помогаем публиковать статьи Международный издатель

Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026