RESEARCH OF TEMPERATURE DISTRIBUTION IN THE PROCESS OF THERMO-FRICTIONAL CUTTING OF TITANIUM ALLOY TI-5553
Sherov K. Ainabekova S. Kuanov I. Myrzakhmet B. Bekzhanov Y. Gabdyssalik R. Mazdubay A. Kamarov A. Sherov A.
2022Institute for Educational Research
Journal of Applied Engineering Science
2022#20Issue 2400 - 407 pp.
This article presents the results of studying the temperature distribution in the process of thermo-frictional cutting of titanium alloy Ti-5553. The process was simulated using the Machining module of the DEFORM 3D software package based on the finite element method. It was found that when cutting off the titanium alloy Ti-5553, depending on the geometry of the circular saw, the temperature in the disk-workpiece contact zone reached T = 800 ÷ 1130 °C, and its propagation into the depth of the workpiece was 0.66 ÷ 0.96 mm. The optimal geometry of a circular saw for cutting off titanium alloy Ti-5553: L1 = 18 mm, L2 = 14 mm, в = 2 mm.
circular saw , cooling zone , heating zone , pulse cooling , temperature , thermal cutting
Text of the article Перейти на текст статьи
S. Seifullin Kazakh Agro Technical University, Faculty of Technical, Nur-Sultan, Kazakhstan
Karaganda Industrial University, Faculty of metallurgy and mechanical engineering, Temirtau, Kazakhstan
D. Serikbayev East Kazakhstan University, School of Mechanical Engineering, Ust-Kamenogorsk, Kazakhstan
Toraigyrov University, Faculty of Engineering, Pavlodar, Kazakhstan
S. Seifullin Kazakh Agro Technical University
Karaganda Industrial University
D. Serikbayev East Kazakhstan University
Toraigyrov University
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026