Synthesis of Al-Ti-Fe-Cr-Ni-N protective coatings by the method of vacuum-arc deposition from a separated vacuum flow
Latushkina S. Kuis D. Posylkina O. Kasperovich A. Panin E.
15 November 2021Elsevier B.V.
Materials Letters
2021#303
The relevance of using high-entropy systems for obtaining coatings by vacuum-plasma methods using plasma separation systems is proved. The influence of technological parameters of the deposition process (arc discharge current at the cathode, bias voltage on the substrate) on the phase and elemental composition of coatings is established. The corrosion behavior in 3% NaCl solution was studied and the main electrochemical characteristics of coatings (Al,Ti,Fe,Cr,Ni) were determined. The heat resistance of the coatings was evaluated.
Corrosion resistance , Heat resistance , Phase composition , Synthesis coatings , Technological parameters , Vacuum-arc deposition
Text of the article Перейти на текст статьи
The Physical-Technical Institute of National Academy Sciences of Belarus, 10 Kuprevich St., Minsk, 220141, Belarus
Belarusian State Technological University, Sverdlova str. 13a, Minsk, 220006, Belarus
Karaganda Industrial University, Republic av. 30, Temirtau, 101400, Kazakhstan
The Physical-Technical Institute of National Academy Sciences of Belarus
Belarusian State Technological University
Karaganda Industrial University
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026