Selective Catalytic Reforming of Methane into Synthesis Gas
Zhumabek> M. Kaumenova G. Augaliev D. Alaidar Y. Murzin D. Tungatarova S. Xanthopoulou G. Kotov S. Baizhumanova T.
November 2021John Wiley and Sons Inc
Chemical Engineering and Technology
2021#44Issue 112026 - 2033 pp.
Syngas is an important product of methane processing of natural gas, from which a wide range of chemical products can be obtained in the future. The results of a study of the developed Ni multicomponent catalysts in the partial oxidation of CH4 to syngas are presented. A series of samples with different percentages of active components in a Ni-Cr-Al-Mg-glycine catalyst was prepared by the solution combustion synthesis method giving synthesis gas with a high yield. The optimum conditions for the highest yields of H2 and CO were identified.
Catalytic reforming , Hydrogen , Methane , Solution combustion synthesis , Synthesis gas
Text of the article Перейти на текст статьи
D. V. Sokolsky Institute of Fuel, Catalysis and Electrochemistry, 142, Kunaev str., Almaty, 050010, Kazakhstan
Satbayev University, 22, Satbayev str., Almaty, 050013, Kazakhstan
al-Farabi Kazakh National University, 71 al-Farabi ave., Almaty, 050040, Kazakhstan
Åbo Akademi University, 8 Biskopsgatan, Turku/Åbo, 20500, Finland
Institute of Nanoscience and Nanotechnology, NCSR “Demokritos”, Aghia Paraskevi, 15310, Greece
M. Kh. Dulaty Taraz Regional University, Suleymenov str., 7, Taraz, 080012, Kazakhstan
D. V. Sokolsky Institute of Fuel
Satbayev University
al-Farabi Kazakh National University
Åbo Akademi University
Institute of Nanoscience and Nanotechnology
M. Kh. Dulaty Taraz Regional University
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026