Stability analysis of a сlosed non-linear system “FC-BM” of the electric drive of an electric vehicle
Yerlan A.Z. Yuri S.I.
February 2024Institute of Advanced Engineering and Science
Bulletin of Electrical Engineering and Informatics
2024#13Issue 1134 - 142 pp.
The article presents the analysis and stability program of the closed non-linear system frequency converter-brushless motor “(FC-BM)”, which differs significantly from the analysis of linear systems. First of all, this is because the stability property of a nonlinear system depends on the initial conditions and external influences: for some input signals, the system will be stable, while for others it becomes unstable. Consequently, the stability criteria developed in the linear theory cannot be applied to their analysis. The stability of a non-linear automatic control system means that small changes in the input signal or disturbances, initial conditions, or plant parameters will not take the output variable beyond a sufficiently small neighborhood of the equilibrium point or limit cycle. Since several equilibrium positions can exist for a non-linear system, stability should be analyzed in the vicinity of each of them. This complicates the task of research.
Brushless motor , Electric drive , Frequency converter , Non-linear systems , Stability
Text of the article Перейти на текст статьи
Department of Robotics and Automation Equipment, Satbayev University, Almaty, Kazakhstan
Department of Power Supply and Renewable Energy Sources, Almaty University of Power Engineering and Telecommunications named after G. Daukeev, Almaty, Kazakhstan
Department of Robotics and Automation Equipment
Department of Power Supply and Renewable Energy Sources
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026