STUDY OF THE PROPERTIES OF OVERBURDENED ROCKS FROM COAL MINING: OVERBURDEN – AS A RAW MATERIAL IN THE PRODUCTION OF CERAMIC BRICKS
Vyshar O. Stolboushkin A. Rakhimova G. Stanevich V. Rakhimov M.
July 2023GEOMATE International Society
International Journal of GEOMATE
2023#25Issue 10786 - 94 pp.
With the development of industry, the amount of man-made waste is growing rapidly. It is necessary to develop energy-efficient resource-saving technologies for use in the processing of. Research in past years has proved the possibility of using coal industry wastes as burning and baking additives in the production of ceramic products. The purpose of this work is to review the properties and discuss the options for using overburden as the main raw material in the production of ceramic bricks. Overburden requires a small amount of organic and chemical additives to adjust its technological properties. This research is due to the need to solve environmental, economic and technological problems in the utilization of overburdened rocks from coal mining. The physical and mechanical properties as well as chemical and mineralogical compositions of overburden have been investigated. Due to the heterogeneity and non-wettability of raw materials in water, it is necessary to grind them. The structural-mechanical characteristics and molding properties using highly mineralized carbonaceous rocks as a solid additive and aluminum oxychloride as a liquid additive have been studied. The obtained products with the use of additives have higher indicators: compressive strength 33.6-48.2 MPa, frost resistance 50-100 cycles, and water absorption 7.0-10.8. Thus, the results of the research prove the possibility of producing high-quality ceramic bricks from overburden, which will help to significantly reduce the cost of production, compensate for the lack of high-grade clay raw materials, and improve the environmental situation. Nevertheless, further research and technological developments are needed.
Ceramic Brick , Chemical Composition , Overburden , Plastic Strength , Radiation Safety
Text of the article Перейти на текст статьи
Department of Construction Materials and Technologies, Karaganda Technical University, Kazakhstan
Department of Engineering Constructions, Building Technologies and Materials, Siberian State Industrial University, Russian Federation
Faculty Engineering, Toraigyrov University, Kazakhstan
Department of Construction Materials and Technologies
Department of Engineering Constructions
Faculty Engineering
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026