Effect of the Shape and Structure of Maturity Sensors Plastic Housing on Its Physico-Mechanical Properties
Utepov Ye.B. Akhazhanov S.B. Aniskin A. Zharassov Sh.Zh.
2021E.A. Buketov Karaganda University Publish house
Eurasian Physical Technical Journal
2021#18Issue 383 - 87 pp.
This paper presents how the shape and physical structure of the connections affect the performance of the housing of maturity sensor. A two parts rectangular and a keg-shaped cylindrical configurations of plastic housings were sequentially tested for water, shock and load resistance. The tests revealed the weak ingress and shock resistance of the rectangular housing, in comparison with cylindrical one, where no serious defects were identified. Both types of housings performed well during the compression tests on all three sides, showing the bearing capacities from 0.6 to 2.11 kPa, which are equivalent to 65.3 and 165.3 kg of human mass. Based on the results, the study demonstrates an easy-to-handle workflow for generic testing and evaluation of maturity sensors housing. The proposed workflow may be applicable for other types of small-scaled electronic devices.
Concrete sensor , Durability , Housing , Maturity sensor , Non-destructive testing method
Text of the article Перейти на текст статьи
L.N. Gumilyov Eurasian National University, Nur-Sultan, Kazakhstan
Csi Research and Lab, Llp, Nur-Sultan, Kazakhstan
Buketov Karaganda University, Karaganda, Kazakhstan
University North, Vara din, Croatia
L.N. Gumilyov Eurasian National University
Csi Research and Lab
Buketov Karaganda University
University North
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026