The influence of the brake pad construction on noise formation, people’s health and reduction measures
Stojanovic N. Belhocine A. Abdullah O.I. Grujic I.
February 2023Springer Science and Business Media Deutschland GmbH
Environmental Science and Pollution Research
2023#30Issue 615352 - 15363 pp.
The brake system is one of the most important systems on the vehicle, especially from the aspect of traffic safety. The use of the braking system comes with many undesirable effects, such as brake wear and noise emission. The noise that originates from brakes is related to the wear of brake elements, the applied materials for manufacture, to the elements which are connected to each other, and all of this represents a very challengeable problem in the automotive industry. In this paper are presented the dominant parameters that influence noise formation, where the main focus was placed on brake pads, as well as how the noise influences people’s health. After that, further, in the paper, it was analyzed the influence of the brake pads’ construction on the noise formation, and at the end are given the measures for noise reduction. The conclusions of the paper show that the construction of brake pads significantly influences noise emission, noise negatively influences on the people health, and because of the negative influence on the people health, some solutions show that it is necessary to include insulators in the construction of brake pads, and if the space in which people reside is observed, it is necessary during construction to use materials which will prevent noise conduction, into the space in which people reside.
Environment , Noise emission , People health , Pollution
Text of the article Перейти на текст статьи
Faculty of Engineering, University of Kragujevac, Kragujevac, Serbia
Department of Mechanical Engineering, University of Sciences and the Technology of Oran, L.P 1505 El -MNAOUER, USTO, Oran, 31000, Algeria
Department of Energy Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq
Department of Mechanics, Al-Farabi Kazakh National University, Almaty, 050038, Kazakhstan
System Technologies and Engineering Design Methodology, Hamburg University of Technology, Hamburg, Germany
Faculty of Engineering
Department of Mechanical Engineering
Department of Energy Engineering
Department of Mechanics
System Technologies and Engineering Design Methodology
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026