Simulation of the Process of Electric Spark Hardening of the Surfaces of Machine Parts and Mechanisms
Sharifullin S.N. Abzhaev M.M. Bainiyazova A.T.
October 2023Pleiades Publishing
High Energy Chemistry
2023#57S193 - S199 pp.
Abstract: Today, there is a sharp struggle for demanded and competitive products all over the world. The existing traditional production technologies have exhausted their possibilities. New technologies should be based on high energy technologies. One of such technologies is plasma technologies. Among the plasma technologies for hardening metal surfaces, the most suitable is the hardening technology using electric spark discharges. However, these technologies do not currently have process optimization. This article proposes one of the options for solving this problem by simulating the process of electrospark alloying of elements of refractory materials into the surface layer of samples of real parts of machines and mechanisms, which are models of these parts.
electric spark , elemental composition , hardening , microhardness , modeling , nanostructure , sample parts , technology
Text of the article Перейти на текст статьи
Kazan (Volga Region) Federal University, Republic of Tatarstan, Kazan, 420008, Russian Federation
Kyzylorda State University named after Korkyt ata, Kyzylorda, 120014, Kazakhstan
Kazan (Volga Region) Federal University
Kyzylorda State University named after Korkyt ata
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026