Flotation processing of copper-molybdenum ore using a combined flotation reagent
Semushkina L. Abdykirova G. Turysbekov D. Narbekova S. Kaldybaeva Z. Mukhamedilova A.
January 2022Faculty of Metallurgy
Metalurgija
2022#61Issue 1225 - 228 pp.
The paper presents the results of laboratory studies on the flotation of copper-molybdenum ore from the Kazakh-stani deposit using a combined reagent. A combination of butyl xanthate, a noninogenic collecting agent with a thioamide group – TC-100 thionocarbamate and higher aerofloat (Reafloat series) was used as a combined flotation reagent. The ratio of the components of the combined reagent was, in %: 85:15:5. The combined flotation reagent was preliminarily passed through a T18 digital ULTRA-TURRAX disperser before flotation to obtain a reagent micro-emulsion. The use of a microemulsion of a combined reagent increases the extraction of copper into the copper-molybdenum concentrate by 3,69 %, the extraction of molybdenum by 6,05 %.
Concentration , copper-molybdenum ore , Dispergation , Extraction , Flotation
Text of the article Перейти на текст статьи
Satbayev University, Institute of Metallurgy and Ore Benefication, Almaty, Kazakhstan
Satbayev University
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026