Development of new three-component BNP-inhibitor for carbon steel in 0.5 mol·dm–3 HCl solution. Thermodynamic, adsorption and electrochemical studies
Seilova T. Kunasheva Z. Kubasheva R. Akatyev N.
2024Russian Association of Corrosion Engineers
International Journal of Corrosion and Scale Inhibition
2024#13Issue 21268 - 1291 pp.
In this work, the development and investigation of a new in situ synthesised BNP-inhibitor based on boric acid (H3BO3), 1,4-phenylenediamine, and trisodium orthophosphate (Na3PO4) as an effective corrosion inhibitor for carbon steel were reported. The corrosion inhibition properties of the developed BNP-inhibitor were studied using the weight loss assay and electrochemical measurement. It was found that at the components molar ratio of 3: 2: 1 (×10–3 mol·dm–3) developed inhibitor demonstrates inhibition efficiency up to 93.2% in 0.5 mol·dm–3 HCl solution. Temperature, inhibitor concentration, molar ratio, and nature of the components strongly affect the degree of metal protection. The Langmuir adsorption model turned out to be the most suitable to describe the BNP-inhibitor adsorption mechanism. The free Gibbs energy change corresponds to spontaneous and physical nature of the inhibitor adsorption. Replacing the inhibitor components with similar counterparts does not lead to an increase in protective efficiency. Electrochemical results showed high efficiency of the BNP-inhibitor and are in excellent agreement with gravimetric data.
adsorption , BNP-inhibitor , carbon steel , corrosion , corrosion rate , inhibition , metal protection
Text of the article Перейти на текст статьи
M. Utemisov West Kazakhstan university, Nazarbayev av. 162, Uralsk, Kazakhstan
M. Utemisov West Kazakhstan university
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026