Failure analysis of 3D stitched composite using multi-scale approach for aerospace structures
Saboktakin A. Kalaoglu F. Shahrooz M. Spitas C. Farahat S.
2022Taylor and Francis Ltd.
Journal of the Textile Institute
2022#113Issue 5943 - 951 pp.
Finite element modeling is an excellent technique for simulating a stitched woven composite to determine its mechanical properties and the analysis of the damage progress. In this technique, actual textile tow geometry measurements based on textile fiber photomicrographs are used to make the internal geometry of the fabric. In this paper, a unit-cell of the stitched composite was generated in micro and mesoscale geometric in the first step, and afterward, unit-cell was imported to finite element analysis software. Besides, a code for calculating the mechanical coefficient of the stitched composite was implemented in the micro and meso models. Finally, a user-defined subroutine implements the damage model in the finite element code to predict damage initiation of the stitched composite. The results of finite element modeling indicate a good agreement between experimental results and theoretical results. The finding of this research will contribute to the investigation of the integrity and damage tolerance of the 3 D stitched composite materials. It is able to assist in the certification of a modern aircraft made of stitched composites.
Aerostructure , Finite element analysis , Progressive damage analysis , Stitched composite , Unit cell
Text of the article Перейти на текст статьи
University of Sistan and Baluchestan, Zahedan, Iran
Istanbul Technical University (ITU), Istanbul, Turkey
Nazarbayev University, Kazakhstan
University of Sistan and Baluchestan
Istanbul Technical University (ITU)
Nazarbayev University
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026