Results of Pilot Comparisons of National Standards for the Activity of Hydrogen Ions in Aqueous Solutions


Prokunin S.V. Shchipunov A.N. Vengina D.A. Bastkowskiy F. Uysal E. Mkrtichyan S. Zhanasbaeva B.K. Beskupskiy A. Tabullo O.B. Zolotorevich E.A. Petrenko A.V.
April 2021Springer

Measurement Techniques
2021#64Issue 170 - 76 pp.

The enormous need for support of measurements of the hydrogen index (pH) in various branches of industry and the national economy of Russia make measurement of pH one of the most important methods for monitoring aqueous media. In 2013 work was carried out to introduce into the State Register of Means of Measurement of the Russian Federation a buffer solution and titration standard with a pH value of 7.00, a 2nd order working standard for pH which is one of the nonstandard solutions most in demand for verification and calibration of instruments for measuring pH. The metrological characteristics of the 2nd order working standard for pH have been confirmed in pilot comparisons through COOMET (COOMET project 655/RU/15). The results of a pilot comparison for determination of the pH of a phosphate buffer solution with pH=7.00 are presented here. 8 metrological institutes and 10 metrological organizations took part in the comparisons. The results showed that the overwhelming majority of the participants in the comparisons obtained results for the pH measurements with an uncertainty that did not exceed ±0.03 of the average value, which is an acceptable criterion for pH measurements.

buffer solution , comparisons , metrology , pH standard , potentiometry , primary standard , standards

Text of the article Перейти на текст статьи

Russian Metrological Institute of Technical Physics and Radio Engineering (VNIIFTRI), Mendeleevo, Russian Federation
Physikalisch-Technische Bundesanstalt (PTB), Braunschweig, Germany
TÜBITAK UME National Metrology Institute (TÜBITAK UME), Gebze, Kocaeli, Turkey
Institute of Metrology of the Georgian National Agency for Standards and Metrology (GeoSTM), Tbilisi, Georgia
Kazakhstan Institute of Metrology (KazInMetr), Astana, Kazakhstan
National Institute of Metrology (INM), Chisinau, Moldova
Center for Standardization and Metrology of the Ministry of Economy of the Kyrgyz Republic (Kyrgyzstandart), Bishkek, Kyrgyzstan
Belarusian State Institute of Metrology (BelGIM), Minsk, Belarus
All-Ukrainian State Scientific and Production Center of Standardization, Metrology, Certification and Consumer’ Rights Protection (Ukrmetrteststandard), Kiev, Ukraine

Russian Metrological Institute of Technical Physics and Radio Engineering (VNIIFTRI)
Physikalisch-Technische Bundesanstalt (PTB)
TÜBITAK UME National Metrology Institute (TÜBITAK UME)
Institute of Metrology of the Georgian National Agency for Standards and Metrology (GeoSTM)
Kazakhstan Institute of Metrology (KazInMetr)
National Institute of Metrology (INM)
Center for Standardization and Metrology of the Ministry of Economy of the Kyrgyz Republic (Kyrgyzstandart)
Belarusian State Institute of Metrology (BelGIM)
All-Ukrainian State Scientific and Production Center of Standardization

10 лет помогаем публиковать статьи Международный издатель

Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026