INFLUENCE ASSESSMENT OF MICRO SILICA ADDITIVE WITH PLASTICIZER ON PROPERTIES OR FINE-GRAINED FIBER CONCRETE
Nurbayeva M. Lukpаnov R. Tsygulyov D. Yenkebayev S. Orazova D.
2022GEOMATE International Society
International Journal of GEOMATE
2022#23Issue 10062 - 69 pp.
The paper presents the results of the study of the effect of micro silica on the strength of fine-grained fiber concrete. The possibility of using micro silica as a partial replacement for Portland cement in the composition of fiber concrete has been studied. The cement replacement ratio was 5%, 10%, 20%, and 30% of the binder weight. A reference concrete mixture was also prepared. The authors performed tests to determine the setting time of cement dough with different percentages of micro silica. In the presented work micro silica, a complex additive based on polycarboxylate (MasterGlenium 27) and polypropylene fiber was used. Analysis of the results shows that such additives increase the compressive strength and flexural tensile strength depending on the dosage and change in the time of setting. The optimal composition of fiber concrete using micro silica and plasticizer based on polycarboxylate has been selected, which makes it possible to reduce cement consumption while improving the physical and mechanical characteristics of fiber concrete. It was shown that fiber concrete with the addition of micro silica together with plasticizer MasterGlenium 27 has high physical and mechanical properties.
Fiber concrete , Micro silica , Polypropylene fiber , Setting time
Text of the article Перейти на текст статьи
Architecture and Construction, L.N. Gumilyov Eurasian National University, Kazakhstan
Toraighyrov University, Kazakhstan
Architecture and Construction
Toraighyrov University
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026